KLT-30E - Kettle Blodgett - Free user manual and instructions
Find the device manual for free KLT-30E Blodgett in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Electric Tilting Kettle |
| Model | KLT-30E |
| Brand | Blodgett |
| Capacity | 30 quarts (28.4 liters) |
| Power Supply | 208V / 60Hz, 3-phase |
| Power Rating | 10.5 kW |
| Dimensions (W x D x H) | 24 in x 24 in x 36 in |
| Weight | 200 lbs (90.7 kg) |
| Heating Method | Electric immersion elements |
| Temperature Control | Adjustable thermostat with pilot light |
| Tilting Mechanism | Manual tilt with locking handle |
| Construction Material | Stainless steel body and cover |
| Cover | Hinged cover with spring assist and handle |
| Drain | 3/4 in draw-off valve with swing spout |
| Safety Features | High-limit thermostat, element guard, manual reset |
| Maintenance | Daily cleaning of exterior and interior; periodic element descaling |
| Warranty | 1 year parts and labor |
| Standards | NSF/ANSI 4, UL listed |
Frequently Asked Questions - KLT-30E Blodgett
How do I turn on the Blodgett KLT-30E kettle?
Ensure the kettle is connected to a proper 208V power supply. Turn the thermostat knob to the desired temperature setting. The pilot light will illuminate indicating the kettle is heating.
What is the maximum water level for the KLT-30E?
Do not fill above the marking indicated inside the kettle, typically 3/4 full to allow for boiling expansion.
How do I tilt the kettle to empty contents?
Release the tilt lock handle, then slowly rotate the handle clockwise to tilt. Use caution with hot liquids. Lock the handle after tilting.
The kettle is not heating. What should I check?
Check the circuit breaker and ensure the unit is plugged in. Verify the thermostat is set above room temperature. If still not heating, the high-limit thermostat may have tripped; press the reset button on the back.
How do I clean the KLT-30E kettle?
Allow to cool. Wipe exterior with mild detergent and damp cloth. For interior, fill with warm water and a non-abrasive cleaner, brush gently, and rinse thoroughly. Do not immerse control panel.
Can I use the kettle to cook acidic foods?
Yes, the stainless steel construction is resistant to acids. However, prolonged contact with highly acidic foods may discolor the surface; clean promptly after use.
What is the average heating time for a full load of water?
With 30 quarts of water, the kettle reaches boiling (212°F) in approximately 20-30 minutes, depending on starting temperature.
How often should I descale the heating elements?
If you have hard water, descale every 3 months using a commercial descaling solution. Follow the instructions provided with the cleaner.
Is the KLT-30E kettle suitable for floor mounting?
Yes, the kettle is designed for floor mounting. Ensure the floor is level and capable of supporting the weight (200 lbs empty). Use the provided leg levelers.
Where can I purchase replacement parts?
Contact Blodgett authorized service centers or visit the official Blodgett parts website. Common parts include heating elements, thermostats, and gaskets.
User questions about KLT-30E Blodgett
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Kettle in PDF format for free! Find your manual KLT-30E - Blodgett and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. KLT-30E by Blodgett.
USER MANUAL KLT-30E Blodgett
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Blodgett
Model : KLT-30E
Category : Kettle