KLS-60G - Kettle Blodgett - Free user manual and instructions
Find the device manual for free KLS-60G Blodgett in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Gas Kettle |
| Brand | Blodgett |
| Model | KLS-60G |
| Category | Commercial Kettle |
| Capacity | 60 Quarts (approx. 57 Liters) |
| Fuel Type | Natural Gas or Propane (field convertible) |
| BTU Input | 100,000 BTU/hr |
| Dimensions (W x D x H) | 24 x 24 x 36 inches (approx.) |
| Weight | 200 lbs (approx. 91 kg) |
| Construction Material | Stainless Steel Exterior and Interior |
| Thermostat Control | Adjustable thermostat with temperature range up to 300°F |
| Safety Features | Pilot safety system, high-limit cut-off, tip-over switch |
| Drain Valve | Front-mounted 1-inch full port drain valve |
| Ignition | Manual pilot with electronic spark igniter option |
| Included Accessories | Lid, thermostat probe, and installation hardware |
| Cleaning Instructions | Exterior: damp cloth with mild detergent; Interior: flush with water and vinegar solution |
| Maintenance | Annual inspection of gas lines, burner, and safety devices |
| Spare Parts Available | Thermostat, burner assembly, pilot assembly, drain valve, gaskets |
| Warranty | 1 year parts and labor (ask dealer for details) |
| Certifications | NSF, ANSI, UL (for gas appliances) |
Frequently Asked Questions - KLS-60G Blodgett
How do I light the pilot on my Blodgett KLS-60G
Turn the gas valve to pilot, press and hold the red reset button, and ignite the pilot with a long lighter or built-in spark igniter. Hold the reset button for 30 seconds after the pilot lights, then release.
How do I clean the interior of the kettle
Fill the kettle with water and a vinegar solution (1:1 ratio) and bring to a boil. Let it stand for 30 minutes, then drain and rinse thoroughly with clean water. For stubborn stains, use a non-abrasive cleaner.
What is the capacity of the KLS-60G
The kettle has a capacity of 60 quarts (approximately 57 liters).
Can the kettle be converted from natural gas to propane
Yes, the KLS-60G is field convertible. You will need a conversion kit (orifice changes) and must adjust the gas pressure regulator. Consult the service manual for instructions.
What does the high-limit cut-off do
The high-limit cut-off is a safety device that shuts off the gas supply if the kettle temperature exceeds a safe level, preventing overheating or damage.
How do I drain the kettle
Open the front-mounted drain valve slowly. Make sure the kettle is turned off and the contents have cooled. Use a bucket or hose to direct the liquid.
What type of gas does the KLS-60G use
It is designed for natural gas or propane (LP). Check the model plate and use the correct gas type. Conversion is possible with a kit.
Where can I find spare parts for my Blodgett kettle
Spare parts can be ordered from authorized Blodgett dealers or directly from the manufacturer. Common parts include thermostat, burner, pilot assembly, and drain valve.
How long does the warranty last
The standard warranty is 1 year for parts and labor. Some components may have extended coverage. Check your purchase documentation.
What should I do if the kettle won't heat
Check that the gas supply is on, the pilot is lit, and the thermostat is set correctly. Ensure the high-limit cut-off has not tripped. Consult the troubleshooting section in your manual.
User questions about KLS-60G Blodgett
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Kettle in PDF format for free! Find your manual KLS-60G - Blodgett and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. KLS-60G by Blodgett.
USER MANUAL KLS-60G Blodgett
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Blodgett
Model : KLS-60G
Category : Kettle