005082 - Saw Meec Tools - Free user manual and instructions
Find the device manual for free 005082 Meec Tools in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Saw |
| Brand | Meec Tools |
| Model | 005082 |
| Power Source | Electric corded |
| Motor Power | 1200 W |
| Blade Diameter | 200 mm |
| Max Cutting Depth at 90° | 70 mm |
| Max Cutting Depth at 45° | 50 mm |
| No-Load Speed | 5000 rpm |
| Bevel Capacity | 0° - 45° |
| Weight | 4.5 kg |
| Dimensions (L x W x H) | 350 x 250 x 300 mm |
| Safety Features | Blade guard, safety switch, anti-kickback |
| Maintenance | Clean blade after use, lubricate moving parts, check power cord |
| Spare Parts Availability | Blades, carbon brushes, power switch |
| Repairability | User-replaceable carbon brushes and blade |
| Included Accessories | Rip fence, push stick, hex key |
| Recommended Use | DIY and light professional woodworking |
Frequently Asked Questions - 005082 Meec Tools
How do I change the blade on the Meec Tools 005082 saw?
Unplug the saw. Use the included hex key to loosen the blade bolt. Remove the outer flange and old blade. Install new blade with teeth facing forward, then tighten the bolt securely.
What is the maximum cutting depth of this saw?
At 90° the max cutting depth is 70 mm, and at 45° it is 50 mm.
Can I use this saw for cutting metal?
This saw is designed for wood and wood-based materials. Using it on metal may damage the blade and void the warranty. Use a specific metal-cutting blade if necessary.
How do I adjust the bevel angle?
Loosen the bevel lock lever, tilt the base to desired angle (0-45°), and retighten the lever. Confirm with a protractor if needed.
Why does the saw stop during use?
This may be due to overload protection. Let the saw cool down for a few minutes. Also check the power cord and circuit breaker. If problem persists, inspect carbon brushes.
How often should I replace the carbon brushes?
Replace carbon brushes when they are worn to less than 5 mm length, or if you notice sparking or power loss. Typically every 50-100 hours of use.
Is the saw compatible with a dust extraction system?
Yes, the saw has a dust port (typically 35 mm) that can be connected to a vacuum cleaner or dust extractor.
What safety precautions should I take?
Always wear safety glasses and hearing protection. Use the push stick for narrow cuts. Keep hands away from the blade. Ensure the blade guard works properly.
Where can I find spare parts for the 005082?
Spare parts are available at Jula stores or online. Common parts include blades, carbon brushes, and the power switch. Use the model number 005082.
How do I clean and maintain the saw?
Unplug the saw. Remove sawdust with a brush or compressed air. Wipe the base plate with a damp cloth. Lubricate moving parts with light oil. Inspect the power cord for damage.
User questions about 005082 Meec Tools
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Saw in PDF format for free! Find your manual 005082 - Meec Tools and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 005082 by Meec Tools.
USER MANUAL 005082 Meec Tools
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Meec Tools
Model : 005082
Category : Saw