PF54 - Vacuum Cleaner Powr-Flite - Free user manual and instructions
Find the device manual for free PF54 Powr-Flite in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Upright Vacuum Cleaner for Commercial Use |
| Brand | Powr-Flite |
| Model | PF54 |
| Dimensions (L x W x H) | 18 x 14 x 48 inches (46 x 36 x 122 cm) |
| Weight | 28 lbs (12.7 kg) |
| Power Supply | 120V, 60Hz, 15 A |
| Motor Power | 1520 Watts (Max) |
| Suction Power | 130 CFM / 117 AW |
| Dust Capacity | 1.5 gallons (5.7 liters) |
| Filtration System | Multi-stage filtration: Foam pre-filter, HEPA-type bag, and final motor filter |
| Cord Length | 50 feet (15.2 meters) |
| Cleaning Path Width | 14 inches (36 cm) |
| Brush Roll Type | Reversible, with height adjustment for multiple carpet types |
| Noise Level | Approximately 75 dB |
| Maintenance | Regularly empty bag, clean pre-filter, and inspect brush roll for debris |
| Safety Features | Thermal overload protection, cord strain relief, and foot-activated switch |
| Spare Parts | Available: vacuum bags (model PF54-BAG), pre-filters, and brush rolls |
| Warranty | 1 year limited warranty |
| Certifications | UL Listed, CSA Certified |
Frequently Asked Questions - PF54 Powr-Flite
How often should I replace the vacuum bag?
Replace the bag when it is about 2/3 full, or at least every 3 months for optimal performance. Use genuine PF54-BAG bags.
Can I wash the foam pre-filter?
Yes, the foam pre-filter is washable. Clean it with lukewarm water and mild detergent, then let it air dry completely before reinstalling.
Why is the vacuum losing suction?
Common causes: a full bag, clogged hose, dirty pre-filter, or blockages in the brush roll. Check each component and clean as needed.
How do I change the brush roll?
Turn off and unplug the vacuum. Remove the bottom plate, release the old brush roll, and install the new one (model PF54-BRUSH). Reassemble securely.
What type of carpet can the PF54 clean?
The PF54 is designed for low to medium-pile commercial carpets. Adjust the height setting to match carpet thickness.
Does the vacuum have a HEPA filter?
The PF54 uses a HEPA-type bag that traps fine particles. For maximum filtration, ensure you use the correct bag and replace it regularly.
Can I use extension cords?
It is not recommended. The vacuum requires a dedicated 15A circuit. If necessary, use a heavy-duty 14-gauge cord no longer than 50 feet.
How do I reset the thermal overload protector?
If the vacuum shuts off, unplug it and allow it to cool for 30 minutes. Then plug it back in and turn it on. The protector will reset automatically.
What maintenance is required after each use?
Empty the bag if needed, remove any debris from the brush roll, and check the cord for damage. Store the vacuum in a dry area.
Where can I purchase spare parts?
Spare parts are available from authorized Powr-Flite dealers or online retailers. Use the part numbers: PF54-BAG, PF54-FILTER, and PF54-BRUSH.
User questions about PF54 Powr-Flite
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Vacuum Cleaner in PDF format for free! Find your manual PF54 - Powr-Flite and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PF54 by Powr-Flite.