AXLOC-CH5 - Uncategorized AXESS - Free user manual and instructions
Find the device manual for free AXLOC-CH5 AXESS in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Line Output Converter |
| Channels | 5 (Front L/R, Rear L/R, Subwoofer) |
| Input Type | Speaker-level (high-level) inputs |
| Output Type | RCA (low-level) outputs |
| Dimensions (Approx.) | 4.3 x 2.6 x 1.2 inches |
| Weight | 0.2 lbs |
| Power Supply | Passive (no external power required) |
| Input Voltage Range | Up to 12V RMS per channel |
| Output Voltage Level | Up to 6V RMS per channel |
| Frequency Response | 20Hz - 20kHz |
| Signal to Noise Ratio | > 100dB |
| Total Harmonic Distortion (THD) | < 0.01% |
| Adjustable Input Level | Yes, via potentiometer per channel pair |
| Ground Loop Isolation | Built-in |
| Remote Turn-On Output | Yes (12V remote trigger) |
| Housing Material | Aluminum alloy |
| Connector Type | Speaker wire inputs, RCA outputs |
| Installation Location | Behind stereo or under seat |
| Maintenance & Cleaning | Wipe with dry cloth; avoid moisture |
| Safety | Not waterproof; disconnect battery before installation |
| Replacement Parts & Repairability | No user-serviceable parts; contact dealer for warranty |
Frequently Asked Questions - AXLOC-CH5 AXESS
What is the AXESS AXLOC-CH5?
The AXESS AXLOC-CH5 is a 5-channel line output converter that allows you to tap into factory speaker outputs and convert them to RCA connections for aftermarket amplifiers.
How do I install the AXLOC-CH5?
Connect the high-level speaker wire inputs to your factory speaker outputs. Then run RCA cables from the AXLOC-CH5 to your aftermarket amplifier. Ensure all connections are secure and the ground loop isolation switch is set appropriately.
Does the AXLOC-CH5 require external power?
No, it is a passive device and does not require an external power source. It gets power from the audio signal itself.
Can I use the AXLOC-CH5 with a subwoofer?
Yes, the AXLOC-CH5 has a dedicated subwoofer channel output (5th channel) for connecting a subwoofer amplifier.
What is the frequency response of the AXLOC-CH5?
The frequency response is 20Hz to 20kHz, covering the full audible range for high-quality audio reproduction.
How do I adjust the input level on the AXLOC-CH5?
Use the small potentiometers on the unit to adjust the input sensitivity for each channel pair, matching the output to your amplifier's requirements.
Is the AXLOC-CH5 weatherproof?
No, the AXLOC-CH5 is not weatherproof. It should be installed inside the vehicle, away from moisture and extreme temperatures.
Can I connect multiple AXLOC-CH5 units?
Yes, you can use multiple converters if you need more channels, but ensure the total input impedance is within your head unit's capabilities.
What is the warranty on the AXLOC-CH5?
The typical warranty is 1 year from the date of purchase. Contact AXESS for specific terms.
How do I troubleshoot no sound output from the AXLOC-CH5?
Check that the speaker-level inputs are properly connected and that the amplifier is on. Verify the RCA cables are secure. Ensure the input level potentiometers are not turned all the way to minimum.
User questions about AXLOC-CH5 AXESS
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual AXLOC-CH5 - AXESS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AXLOC-CH5 by AXESS.
USER MANUAL AXLOC-CH5 AXESS
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : AXESS
Model : AXLOC-CH5
Category : Uncategorized