AVR-3600DTS - Receiver DENON - Free user manual and instructions
Find the device manual for free AVR-3600DTS DENON in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | AV Receiver |
| Brand | Denon |
| Model | AVR-3600DTS |
| Dimensions (W x H x D) | 17.1 x 6.1 x 15.4 inches (435 x 155 x 392 mm) |
| Weight | 28.7 lbs (13.0 kg) |
| Power Consumption | 520 W (standby: 0.3 W) |
| Power Output (8 ohms, 20Hz-20kHz, 0.08% THD) | 100 W x 5 channels |
| Surround Sound Decoding | Dolby Pro Logic, DTS |
| Audio Inputs | 5 analog stereo, 1 phono (MM), 1 optical, 1 coaxial digital |
| Video Inputs | 3 composite, 2 S-Video |
| Video Outputs | 1 composite, 1 S-Video monitor out |
| Tuner Bands | FM, AM |
| Remote Control | Included (RC-903) |
| Cleaning Instructions | Wipe with a soft, dry cloth. Do not use solvents. |
| Safety Precautions | Do not expose to rain or moisture. Do not block ventilation slots. |
| Spare Parts Available | Remote control, FM/AM antenna, user manual |
| Repairability | Consult a qualified technician for internal repairs. |
Frequently Asked Questions - AVR-3600DTS DENON
How do I connect my speakers?
Use speaker wire to connect the receiver's speaker terminals to your speakers. Ensure correct polarity (positive to positive, negative to negative). The impedance should be 4-16 ohms.
How do I set up the DTS decoding?
Press the 'Surround Mode' button on the remote or front panel and select 'DTS' from the menu. Ensure your source device is outputting a DTS signal.
What is the maximum power output?
The receiver delivers 100 watts per channel into 8 ohms (20Hz-20kHz, 0.08% THD) for all five channels.
How do I clean the receiver?
Wipe the exterior with a soft, dry cloth. Do not use any liquids or cleaning agents. Avoid getting dust inside the ventilation slots.
Can I use the receiver with a turntable?
Yes, there is a dedicated phono input (MM) for turntables with a moving magnet cartridge.
How do I program the remote control?
Refer to the user manual for programming instructions. Typically, you enter a code for your brand of TV or other device.
What should I do if there is no sound?
Check that the correct input source is selected, speakers are connected properly, and the volume is turned up. Also ensure the muting function is off.
How do I reset the receiver to factory settings?
While holding down the 'Power' button, press and hold the 'Tone' and 'Surround' buttons simultaneously until 'Reset' appears on the display.
Does the receiver support Dolby Digital?
No, this model features Dolby Pro Logic and DTS, but not Dolby Digital (AC-3). It is an earlier generation surround receiver.
Where can I find spare parts?
Contact Denon customer service or authorized dealers. Common spare parts include the remote control and FM/AM antenna.
User questions about AVR-3600DTS DENON
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual AVR-3600DTS - DENON and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AVR-3600DTS by DENON.
USER MANUAL AVR-3600DTS DENON
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : DENON
Model : AVR-3600DTS
Category : Receiver