917.28826 - Hedge Trimmer Craftsman - Free user manual and instructions
Find the device manual for free 917.28826 Craftsman in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Hedge Trimmer |
| Brand | Craftsman |
| Model | 917.28826 |
| Engine Displacement | 25 cc |
| Blade Length | 22 inches |
| Cutting Capacity | 0.75 inches |
| Weight | 12 lbs |
| Fuel Type | 2-cycle gas/oil mixture (50:1) |
| Start Type | Recoil start |
| Handle Type | Rear handle with trigger |
| Blade Material | Hardened steel |
| Safety Lock | Lock-off switch |
| Vibration Reduction | Built-in |
| Warranty | 2-year limited |
| Maintenance | Clean after each use; sharpen blade regularly |
| Storage | Store in dry place; drain fuel for long storage |
| Safety Features | Hand guard, safety lock, low kickback |
| Repairability | Replacement parts available; repair manual included |
Frequently Asked Questions - 917.28826 Craftsman
How to start the Craftsman 917.28826 hedge trimmer?
Ensure the fuel tank is filled with a 50:1 gas/oil mixture. Press the primer bulb 5-6 times, set the choke to the closed position, and pull the recoil cord. Once the engine starts, open the choke gradually.
What fuel mixture ratio does it require?
The recommended fuel mixture ratio is 50:1 (gas to oil). Use a high-quality 2-cycle oil designed for air-cooled engines.
How to sharpen the blade?
Remove the blade from the trimmer. Use a flat file to sharpen each tooth at the original angle, or take it to a professional sharpening service. Always wear gloves.
How to store the hedge trimmer for winter?
Drain the fuel tank completely, run the engine until it stops to clear the carburetor. Clean the trimmer, apply a light oil to the blade, and store in a dry, protected area.
What is the blade length?
The blade length is 22 inches, suitable for medium to large hedges.
How to replace the blade?
Remove the bolts securing the blade using a wrench, lift off the old blade, place the new blade in position, and tighten the bolts securely. Refer to the manual for torque specifications.
What safety precautions should I take?
Always wear safety goggles, gloves, and long pants. Keep the trimmer away from hidden wires and wet conditions. Use the lock-off switch to prevent accidental starting.
How to adjust the carburetor?
Carburetor adjustment is best performed by a qualified technician. If you have experience, locate the idle mixture screw and adjust it according to the manual’s instructions.
What type of oil should I use?
Use a high-quality 2-cycle engine oil that meets JASO FD or ISO-L-EGD standards. Mix with fresh unleaded gasoline at a 50:1 ratio.
How to clean the air filter?
Remove the air filter cover, take out the filter, wash it with warm soapy water, rinse thoroughly, allow to dry completely, and reinstall. Replace if damaged.
User questions about 917.28826 Craftsman
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Hedge Trimmer in PDF format for free! Find your manual 917.28826 - Craftsman and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 917.28826 by Craftsman.
USER MANUAL 917.28826 Craftsman
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Craftsman
Model : 917.28826
Category : Hedge Trimmer