Bogen

NQ-GA40P3 - Receiver Bogen - Free user manual and instructions

Find the device manual for free NQ-GA40P3 Bogen in PDF.

📄 4 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Bogen NQ-GA40P3 - page 2
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Commercial Audio Receiver
Brand Bogen
Model NQ-GA40P3
Dimensions (H x W x D) 3.5 x 19 x 12 inches (2U rack mount)
Weight 10 lbs
Power Supply 120V AC, 60 Hz
Power Consumption 150W maximum
Audio Inputs 4 line-level RCA, 1 microphone XLR
Audio Outputs 2 speaker binding posts (4-8 ohms)
Frequency Response 20 Hz - 20 kHz
Total Harmonic Distortion < 0.1%
Signal-to-Noise Ratio > 80 dB
Amplifier Power 40W RMS per channel stereo
Controls Volume, bass, treble, input selector
Indicators Power LED, Signal present LED
Mounting 19-inch rack mountable (2U)
Cooling Internal fan, forced air
Operating Temperature 32°F to 104°F (0°C to 40°C)
Cleaning Wipe with a dry cloth; do not use liquids
Safety Keep away from moisture; unplug before servicing
Spare Parts Contact Bogen support for replacement parts

Frequently Asked Questions - NQ-GA40P3 Bogen

How do I connect speakers to the NQ-GA40P3?
Use the speaker binding posts on the rear panel. Ensure the impedance is between 4 and 8 ohms. Connect the positive terminal to the speaker’s positive and negative to negative.
What is the power output of this receiver?
The NQ-GA40P3 delivers 40W RMS per channel into 8 ohms, stereo.
Can I use a microphone with this receiver?
Yes, it has a balanced XLR microphone input on the front panel. Adjust the gain using the trim pot.
Is the NQ-GA40P3 rack-mountable?
Yes, it is standard 19-inch rack mountable in a 2U space. Rack ears are included.
How do I reset the receiver to factory settings?
Press and hold the Power button for 10 seconds until all LEDs flash. Release to reset.
What type of power supply does it use?
It uses 120V AC, 60 Hz and consumes up to 150W. Use the included power cord.
Does the receiver have a remote control?
No, the NQ-GA40P3 does not include a remote control. All controls are on the front panel.
Can I connect multiple audio sources?
Yes, it has 4 line-level RCA inputs and one microphone input. Select the source using the front panel knob.
What is the frequency response?
The frequency response is 20 Hz to 20 kHz with less than 0.1% THD.
How do I clean and maintain the receiver?
Disconnect power. Use a dry, soft cloth to wipe the exterior. Do not use any liquid cleaners. Ensure vents are not blocked.

User questions about NQ-GA40P3 Bogen

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Receiver in PDF format for free! Find your manual NQ-GA40P3 - Bogen and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. NQ-GA40P3 by Bogen.

USER MANUAL NQ-GA40P3 Bogen

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Bogen

Model : NQ-GA40P3

Category : Receiver