MX600.4 - Receiver PHOENIX GOLD - Free user manual and instructions
Find the device manual for free MX600.4 PHOENIX GOLD in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Car Audio Amplifier |
| Brand | Phoenix Gold |
| Model | MX600.4 |
| Number of Channels | 4 |
| Power Output (RMS @ 4 ohms) | 75W x 4 |
| Power Output (RMS @ 2 ohms) | 150W x 4 |
| Bridged Power (RMS @ 4 ohms) | 300W x 2 |
| Frequency Response | 20Hz - 20kHz |
| Input Sensitivity | 0.2V - 8V |
| Dimensions (W x H x D) | 11.0" x 2.0" x 7.5" (280 x 51 x 190 mm) |
| Weight | 4.5 lbs (2.04 kg) |
| Power Supply Voltage | 12V DC (10-16V) |
| Protection Features | Short circuit, Thermal, Overload |
| Cooling | Convection cooled with heatsink |
| Speaker Impedance | 2 ohms - 8 ohms |
| Input Type | RCA high-level inputs |
| Mounting Options | Bracket or screw mount |
| Recommended Fuse | 80A |
| Certifications | C-Tick, CE |
Frequently Asked Questions - MX600.4 PHOENIX GOLD
What is the power output of the Phoenix Gold MX600.4?
The MX600.4 delivers 75 watts RMS per channel at 4 ohms, 150 watts RMS per channel at 2 ohms, and 300 watts RMS bridged into 4 ohms.
What are the dimensions of this amplifier?
The amplifier measures approximately 11 inches wide, 2 inches tall, and 7.5 inches deep (280 x 51 x 190 mm).
What is the optimal input sensitivity setting?
Set the input sensitivity to match your head unit's preamp output voltage, typically between 0.2V and 8V. Use a multimeter or oscilloscope for precise adjustment.
Can I bridge channels on the MX600.4?
Yes, you can bridge two channels into one to get 300W RMS into a 4-ohm load. Ensure the speaker impedance is not lower than 4 ohms when bridged.
What speaker impedance is recommended?
The amplifier is stable from 2 ohms to 8 ohms per channel when not bridged. For bridged operation, use 4 ohms or higher.
What is the recommended power wire and fuse?
Use 4 AWG power wire and a 80 amp fuse for optimal performance. Always fuse the wire within 12 inches of the battery.
Does the amplifier have high-level inputs?
Yes, it includes RCA high-level inputs compatible with aftermarket head units. For factory radios, you may need a line output converter.
How do I adjust the crossover settings?
The MX600.4 features a variable low-pass filter (50-250 Hz) and a variable high-pass filter (50-250 Hz) for each set of channels, allowing you to tune for subwoofers or full-range speakers.
What type of protection does this amplifier have?
It has built-in short circuit, thermal, and overload protection. If the amplifier enters protect mode, check for wiring issues or impedance drops.
Is the MX600.4 compatible with a 4-ohm subwoofer in bridged mode?
Yes, bridging two channels into a 4-ohm subwoofer is safe and yields 300W RMS. Do not wire a subwoofer lower than 4 ohms when bridged.
User questions about MX600.4 PHOENIX GOLD
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual MX600.4 - PHOENIX GOLD and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MX600.4 by PHOENIX GOLD.
USER MANUAL MX600.4 PHOENIX GOLD
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : PHOENIX GOLD
Model : MX600.4
Category : Receiver