BVCPA10W - Car radio BOSS - Free user manual and instructions
Find the device manual for free BVCPA10W BOSS in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type | Car Radio / Receiver |
| Model | BVCPA10W |
| Brand | Boss |
| Chassis Size | Single DIN (2" height) |
| Dimensions (WxHxD) | 7.28 x 2.13 x 5.51 inches (185 x 54 x 140 mm) |
| Weight | 2.2 lbs (1 kg) |
| Power Output | 4 x 80 watts peak (4 x 20 watts RMS) |
| Bluetooth | Built-in for hands-free calling and audio streaming |
| USB Port | Front USB for MP3/WMA playback and device charging |
| SD Card Slot | Supports up to 32 GB for audio files |
| Auxiliary Input | 3.5 mm front AUX input |
| Radio Bands | FM/AM with 30 presets |
| Display | LCD with white backlight, single line |
| Equalizer | Built-in EQ with preset modes (Rock, Pop, Classic, etc.) |
| Remote Control | Included wireless remote |
| Power Supply | 12V DC (negative ground) |
| Fuse Rating | 15A blade fuse |
| Mounting Depth | 4.33 inches (110 mm) |
| Compatibility | Most vehicles with standard DIN opening |
| Included Accessories | Mounting sleeve, trim ring, wiring harness, screws |
| Warranty | 1 year limited |
Frequently Asked Questions - BVCPA10W BOSS
How do I pair my phone via Bluetooth?
Enable Bluetooth on your phone, then press the BT button on the radio. Select 'BVCPA10W' from your phone's device list. If prompted, enter PIN 0000.
What audio formats are supported?
The radio supports MP3 and WMA files from USB or SD card. For best performance, use MP3 at 128-320 kbps.
How do I reset the radio?
Press the Reset button using a pointed object (e.g., pen tip). The button is located on the front panel, usually near the volume knob.
Why is there no sound?
Check if the unit is turned on and volume is not muted. Verify speaker connections. Ensure the Fader and Balance settings are centered. If aftermarket speakers, check impedance (minimum 4 ohms).
Can I install this radio in my car?
Yes, if your car has a standard single DIN slot. You may need a wiring harness adapter (not included) and a dash kit for some vehicles.
How do I set the clock?
Press and hold DISP button until time flashes. Use the VOL knob (turn to adjust, press to move to next field). Set hours and minutes, then press DISP to save.
Does the radio have an aux input?
Yes, there is a 3.5mm AUX input on the front panel. Connect your device and select AUX mode by pressing SRC until AUX appears.
What is the maximum USB/SD capacity?
USB supports up to 32 GB flash drives. SD card slot also supports up to 32 GB. Use FAT32 format.
How do I change the radio presets?
Tune to desired station, then press and hold one of the preset buttons (1-6) for a few seconds until the preset number flashes, then release.
Is the remote control included?
Yes, a wireless remote control is included with the radio. Insert the provided CR2025 battery before use.
User questions about BVCPA10W BOSS
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Car radio in PDF format for free! Find your manual BVCPA10W - BOSS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BVCPA10W by BOSS.
USER MANUAL BVCPA10W BOSS
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : BOSS
Model : BVCPA10W
Category : Car radio