5P1500RC - Inverter EATON - Free user manual and instructions
Find the device manual for free 5P1500RC EATON in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Uninterruptible Power Supply (UPS) |
| Model | 5P1500RC |
| Brand | Eaton |
| Topology | Line-Interactive |
| Output Power Capacity | 1500 VA / 1200 W |
| Output Voltage | 230 V (nominal) |
| Output Waveform | Pure Sine Wave |
| Input Voltage Range | 160-294 V (full load) |
| Form Factor | Rack/Tower convertible |
| Dimensions (H x W x D) | 2U (approx. 8.7 cm x 48.3 cm x 66.0 cm) |
| Weight | Approx. 28 kg (61.7 lbs) |
| Battery Type | Sealed Lead-Acid, maintenance-free |
| Battery Runtime (at full load) | Approx. 7 minutes |
| Battery Runtime (at half load) | Approx. 20 minutes |
| Recharge Time | Typically < 4 hours to 90% |
| Display | Backlit LCD with user controls |
| Communication Ports | USB, RS-232, optional network card slot |
| Safety Features | Surge protection, overload protection, short-circuit protection |
| Operating Temperature | 0-40°C (32-104°F) |
| Approvals | CE, UL, IEC 62040-1 |
| Maintenance | No special maintenance required; keep vents clean |
| Spare Parts | Battery replacement kit available (model: BATT5P1500) |
| Warranty | 3 years (standard) |
Frequently Asked Questions - 5P1500RC EATON
What is the battery runtime of the Eaton 5P1500RC?
The runtime at full load (1200W) is approximately 7 minutes, and at half load about 20 minutes. Actual runtime depends on load and battery health.
How do I replace the battery in the 5P1500RC?
The battery is user-replaceable. Disconnect the UPS from mains and devices, remove the front bezel, slide out the old battery, and replace it with an Eaton authorized battery pack (model BATT5P1500). Follow the manual for safety precautions.
Can the Eaton 5P1500RC be mounted in a server rack?
Yes, the 5P1500RC is rack-mountable (2U) and also convertible to tower orientation. Mounting brackets are included.
What type of output waveform does the 5P1500RC produce?
It produces a pure sine wave output, making it compatible with sensitive electronics, servers, and networking equipment.
How do I perform a self-test on the Eaton 5P1500RC?
Press and hold the test button on the front panel for 2 seconds. The UPS will run a self-test and display the result on the LCD.
What communication options are available for monitoring?
The UPS has USB and RS-232 ports. It also has a slot for an optional network management card (e.g., Eaton Network Card).
Software included: Eaton Intelligent Power Manager.
Software included: Eaton Intelligent Power Manager.
Is the Eaton 5P1500RC suitable for voltage regulation?
Yes, it is a line-interactive UPS with automatic voltage regulation (AVR). It corrects undervoltage and overvoltage without using battery power when possible.
What should I do if the UPS emits a continuous alarm?
A continuous alarm usually indicates a fault. Check the LCD for error codes. Common causes: overload, low battery, or internal fault. Reduce load or replace battery if needed. Consult the manual for specific error codes.
Can I connect power strips or PDU to the UPS?
Yes, but ensure total connected load does not exceed 1200W. Avoid daisy-chaining multiple UPS units.
How do I perform a cold start (start on battery without mains power)?
Press and hold the power button for 2 seconds. The UPS will start on battery if the battery is sufficiently charged.
User questions about 5P1500RC EATON
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Inverter in PDF format for free! Find your manual 5P1500RC - EATON and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 5P1500RC by EATON.
USER MANUAL 5P1500RC EATON
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : EATON
Model : 5P1500RC
Category : Inverter