3S700D - Inverter EATON - Free user manual and instructions
Find the device manual for free 3S700D EATON in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Line-Interactive UPS (Inverter) |
| Model | 3S700D |
| Brand | Eaton |
| Power Capacity | 700 VA / 420 W |
| Input Voltage | 220-240 V AC |
| Output Voltage | 220-240 V AC (sine wave) |
| Input Frequency | 50/60 Hz +/- 3 Hz |
| Output Frequency | 50/60 Hz +/- 0.5 Hz (battery mode) |
| Battery Type | Sealed lead-acid, maintenance-free |
| Typical Battery Life | 3-5 years (depending on usage) |
| Typical Runtime at Half Load | Approximately 15-20 minutes |
| Typical Runtime at Full Load | Approximately 5-8 minutes |
| Recharge Time | 4-6 hours to 90% capacity |
| Form Factor | Tower |
| Dimensions (H x W x D) | 282 mm x 100 mm x 325 mm |
| Weight | 8.5 kg (18.7 lbs) |
| Output Sockets | 4 x Schuko (CEE 7/4) or IEC 320 C13 (depending on region) |
| Protection Features | Overload, short-circuit, battery deep discharge, surge protection |
| User Interface | LED indicators (mains, battery, fault), audible alarm |
| Communication Ports | USB (for monitoring) |
| Software Compatibility | Eaton Intelligent Power Protector / Eaton UPS Companion |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Storage Temperature | -15°C to 45°C (5°F to 113°F) |
| Humidity | 0-95% non-condensing |
| Certifications | CE, TUV, UKCA |
Frequently Asked Questions - 3S700D EATON
What does 700 VA mean?
VA stands for volt-amperes. It indicates the apparent power the UPS can supply. The 3S700D can deliver up to 700 VA, which equals a real power of 420 watts (assuming a power factor of 0.6).
How long will the battery last?
The battery typically lasts 3-5 years under normal conditions. Factors like temperature, number of discharge cycles, and depth of discharge affect lifespan.
Can I replace the battery myself?
Yes, the battery is user-replaceable. Refer to the manual for the correct replacement procedure. Use only approved Eaton replacement batteries.
What does the audible alarm mean?
A continuous beep indicates battery mode. A beep every few seconds indicates low battery. A rapid beep or continuous tone may indicate a fault.
Can I connect a laser printer to this UPS?
No, laser printers draw high peak power and are not recommended. Use the UPS only for sensitive electronics like computers, monitors, and network devices.
How do I test the UPS?
Press and hold the test button on the front panel for a few seconds. The UPS will switch to battery mode to verify functionality. The test lasts about 10 seconds.
What is the input voltage range?
The UPS operates on input voltage from 220-240 V AC. It can accept a voltage range of 184-276 V AC without switching to battery (brownout/overvoltage protection).
Can I use this UPS in a rackmount configuration?
No, the 3S700D is a tower model and is not designed for rackmounting. For rackmount, consider Eaton models like the 5SC or 9SX series.
What software can I use to monitor the UPS?
Eaton offers Intelligent Power Protector (IPP) and UPS Companion software. They allow monitoring, scheduling shutdowns, and email notifications.
Why does the UPS beep continuously when on battery?
Continuous beeping indicates the UPS is on battery power. Check the mains supply. If the beeping pattern changes, refer to the manual for fault codes.
User questions about 3S700D EATON
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Inverter in PDF format for free! Find your manual 3S700D - EATON and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 3S700D by EATON.
USER MANUAL 3S700D EATON
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : EATON
Model : 3S700D
Category : Inverter