9SX3000G - Inverter EATON - Free user manual and instructions
Find the device manual for free 9SX3000G EATON in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Online Double Conversion UPS |
| Brand | Eaton |
| Model | 9SX3000G |
| Capacity (VA/W) | 3000 VA / 2700 W |
| Topology | Online Double Conversion |
| Output Waveform | Pure Sine Wave |
| Input Voltage Range | 208-240 VAC |
| Output Voltage | 208/220/230/240 VAC |
| Frequency | 50/60 Hz (Auto Sensing) |
| Battery Type | Sealed Lead-Acid (VRLA) |
| Battery Runtime (Full Load) | Approx. 5 minutes |
| Dimensions (H x W x D) | 432 x 130 x 650 mm (17.0 x 5.1 x 25.6 in) |
| Weight | 45 kg (99 lbs) |
| Communication Ports | USB, RS-232, EPO (Emergency Power Off) |
| Certifications | UL, CSA, FCC |
| Warranty | 3 years |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Audible Noise | < 50 dBA at 1 meter |
| Maintenance | Hot-swappable batteries, front panel status indicators |
| Safety Features | Overload, short circuit, overheat protection |
Frequently Asked Questions - 9SX3000G EATON
How do I start the UPS for the first time?
Connect the battery pack, plug the UPS into a wall outlet, and press the power button. The UPS will perform a self-test and then output power.
What does the LED display show?
The LED display shows input/output voltage, load level, battery status, and alarm conditions. Refer to the manual for detailed explanations of each icon.
How often should I replace the batteries?
Under normal conditions, batteries should be replaced every 3-5 years. If runtime decreases significantly, consider replacement sooner.
Can I plug the UPS into a power strip?
No, plug the UPS directly into a wall outlet. Avoid using extension cords or power strips to prevent overloading and fire hazards.
How do I interpret the alarm sounds?
A continuous alarm indicates overload or fault. A beeping every few seconds means battery operation. Silence the alarm by pressing the alarm mute button if allowed.
What maintenance is required?
Periodically check the UPS for dust, ensure vents are clear, test runtime annually, and replace batteries as needed. No user maintenance of internal components other than batteries.
Can I connect a generator to the UPS?
Yes, but the generator must provide stable voltage and frequency. The UPS may switch to battery if the generator output is unstable. Use a generator with sufficient capacity.
How do I replace the battery?
Turn off the UPS and disconnect all loads. Remove the front bezel, slide out the battery tray, disconnect old battery, insert new battery, and reassemble. Refer to manual for detailed steps.
What does the overload indicator mean?
The overload indicator shows when the connected load exceeds the UPS capacity. Reduce the load immediately to prevent shutdown. The UPS will alarm and eventually shut off.
How do I update the firmware?
Firmware updates are done via the USB port using Eaton's software tools. Download the latest firmware from Eaton's website and follow the instructions in the software.
User questions about 9SX3000G EATON
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Inverter in PDF format for free! Find your manual 9SX3000G - EATON and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 9SX3000G by EATON.
USER MANUAL 9SX3000G EATON
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : EATON
Model : 9SX3000G
Category : Inverter