KTT-20E - Kettle Blodgett - Free user manual and instructions
Find the device manual for free KTT-20E Blodgett in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type | Tilting Kettle |
| Model | KTT-20E |
| Brand | Blodgett |
| Capacity | 20 gallons (75.7 liters) |
| Power Supply | 208-240V, 3-phase, 10 kW |
| Dimensions (W x D x H) | 30 x 30 x 36 inches (76 x 76 x 91 cm) |
| Weight | 150 lbs (68 kg) |
| Construction Material | Stainless steel interior and exterior |
| Heat Source | Electric |
| Controls | Thermostatic temperature control with ON/OFF switch |
| Temperature Range | 150°F – 212°F (65°C – 100°C) |
| Features | Tilting mechanism with safety lock, pouring lip, manual tilt handwheel |
| Safety Devices | High-limit safety thermostat, pressure relief valve, tilting lock |
| Maintenance | Daily cleaning of exterior and interior, periodic descaling |
| Warranty | 1 year parts and labor |
| Certifications | NSF, UL, CSA |
| Spare Parts | Available through Blodgett authorized service centers |
Frequently Asked Questions - KTT-20E Blodgett
How do I install the KTT-20E kettle?
Ensure the kettle is placed on a level, non-combustible surface with proper ventilation. Electrical connection requires a 208-240V, 3-phase supply by a licensed electrician. Refer to the installation manual for clearance requirements.
What type of water should I use in the kettle?
Use potable water. For best results and to minimize scaling, use filtered or softened water. Avoid using distilled water as it may cause corrosion.
How do I clean the kettle after use?
Allow the kettle to cool. Drain any remaining water. Wipe the interior and exterior with a damp cloth and mild detergent. Rinse thoroughly. For stubborn residues, use a non-abrasive cleaner. Do not use steel wool.
How often should I descale the kettle?
Descaling frequency depends on water hardness. Typically, descale every 3 to 6 months using a commercial descaling solution. Follow the manufacturer's instructions for descaling procedure.
What should I do if the kettle will not heat?
Check that the power cord is plugged in and the circuit breaker has not tripped. Verify the thermostat is set above the current water temperature. If still not heating, contact a qualified service technician.
Can I use the kettle to cook acidic foods?
Yes, the stainless steel construction is resistant to acidic foods. However, avoid prolonged contact with salt or acidic substances to prevent pitting. Rinse the kettle immediately after use.
How do I safely tilt the kettle?
Ensure the kettle is stable and the locking mechanism is disengaged. Use the handwheel to slowly tilt the kettle. Do not overfill; the maximum capacity is 20 gallons. Always lock the kettle in the upright position when not in use.
What is the warranty period for the KTT-20E?
Blodgett offers a standard 1-year warranty on parts and labor for commercial use. Extended warranty options may be available. Refer to the warranty document for details.
Where can I find replacement parts?
Replacement parts can be ordered through Blodgett authorized service centers. Provide the model number KTT-20E and serial number for accurate parts identification.
Is the kettle NSF certified?
Yes, the Blodgett KTT-20E is NSF certified, meeting commercial foodservice sanitation standards.
User questions about KTT-20E Blodgett
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Kettle in PDF format for free! Find your manual KTT-20E - Blodgett and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. KTT-20E by Blodgett.
USER MANUAL KTT-20E Blodgett
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Blodgett
Model : KTT-20E
Category : Kettle