Ultra-2 PAF - Water dispenser Bunn - Free user manual and instructions
Find the device manual for free Ultra-2 PAF Bunn in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Hot and Cold Water Dispenser |
| Brand | Bunn |
| Model | Ultra-2 PAF |
| Dimensions (H x W x D) | 36 x 12 x 14 inches |
| Weight | 45 lbs |
| Power Supply | 120 V, 60 Hz, 1500 W |
| Water Capacity | 3 gallons (hot tank), 2 gallons (cold tank) |
| Hot Water Temperature | 200°F (93°C) |
| Cold Water Temperature | 50°F (10°C) |
| Dispensing Buttons | Push-to-dispense for hot and cold |
| Drip Tray | Removable, dishwasher safe |
| Water Connection | Direct plumbed (requires water line) |
| Installation | Countertop or stand |
| Filtration | Optional external filter |
| Safety Features | Child safety lock on hot water, automatic shut-off |
| Cleaning | Daily wipe down, weekly sanitization of tanks |
| Maintenance | Descale every 3 months |
| Replacement Parts | Available: faucets, heating element, thermostat |
| Warranty | 1 year parts and labor |
Frequently Asked Questions - Ultra-2 PAF Bunn
How do I clean the water dispenser?
Clean the exterior with a damp cloth. For the interior, run a vinegar-water solution through the hot and cold tanks, then rinse thoroughly. Refer to the cleaning instructions in the manual.
Why is my hot water not hot?
Check if the hot water switch is on. Ensure the unit is plugged in and the circuit breaker is not tripped. If still cold, the heating element may need replacement. See troubleshooting section.
How do I install the dispenser?
Place on a level surface. Connect to a cold water line using the provided fitting. Plug into a grounded outlet. Turn on water supply and wait for tanks to fill before dispensing. See installation guide.
What is the temperature of hot water?
The hot water is heated to approximately 200°F (93°C) for optimal brewing and instant beverages.
Can I use it without a water line?
No, this model requires a direct plumbing connection. It is not a bottle-fed dispenser.
How often should I descale?
Descale every 3 months using a descaling solution or white vinegar to prevent mineral buildup. Follow the maintenance schedule.
The dispenser is leaking. What should I do?
Check all water line connections. Ensure the drip tray is properly seated. If leaking from the tank, turn off water and contact customer support.
Does it have a filter?
The dispenser itself does not include a filter, but an external water filter can be added to the supply line for improved taste.
How do I adjust the cold water temperature?
Cold water temperature is preset and not adjustable. If not cold enough, check that the cooling system is running and the condenser coil is clean.
Where can I find replacement parts?
Replacement parts are available through Bunn authorized dealers or online. Common parts include faucets, heating elements, and thermostats.
User questions about Ultra-2 PAF Bunn
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Water dispenser in PDF format for free! Find your manual Ultra-2 PAF - Bunn and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Ultra-2 PAF by Bunn.
USER MANUAL Ultra-2 PAF Bunn
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Bunn
Model : Ultra-2 PAF
Category : Water dispenser