Disney SM1738D - Sewing machine BROTHER - Free user manual and instructions
Find the device manual for free Disney SM1738D BROTHER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Sewing Machine |
| Brand | Brother |
| Model | Disney SM1738D |
| Power Supply | 100-120V, 60Hz |
| Dimensions (W x D x H) | 40 x 18 x 30 cm |
| Weight | 5.5 kg |
| Sewing Speed | Up to 800 stitches per minute |
| Stitch Types | Straight, zigzag, blind hem, buttonhole, stretch, decorative |
| Buttonhole Type | 4-step automatic |
| Needle System | HAx1 (15x1) |
| Presser Foot Type | Snap-on |
| Bobbin System | Top drop-in, transparent bobbin |
| Threading System | Automatic needle threader |
| Lighting | LED lamp |
| Feed System | Drop feed (9 position) |
| Stitch Length | Adjustable, 0-4 mm |
| Stitch Width | Adjustable, 0-5 mm |
| Accessories Included | Presser feet (general, zipper, buttonhole, etc.), needle set, bobbins, seam ripper, screwdriver |
| Warranty | 2 years |
| Maintenance | Clean bobbin area regularly; oil only as directed; store in dust cover |
| Safety Features | Safety switch; automatic shut-off after 30 min idle |
Frequently Asked Questions - Disney SM1738D BROTHER
How do I thread the needle on the Brother Disney SM1738D?
Raise the needle to its highest position, place a spool on the spool pin, route the thread through the thread guide and tension discs, then use the automatic needle threader by pulling down the lever and looping the thread.
How do I change the presser foot?
Raise the presser foot lever and needle. Press the black button on the back of the foot holder to release the current foot. Align the new snap-on foot and lower the holder until it snaps into place.
What type of bobbin does this machine use?
It uses a top drop-in bobbin system. The bobbin is transparent plastic and measures approximately 1.5 cm in diameter. Use Brother bobbins or compatible ones (class 15).
How do I wind the bobbin?
Place the thread on the spool pin, route it through the bobbin winding tension disc, wrap around the bobbin, push the bobbin winder latch to the right, and press the foot controller. The machine will stop automatically when full.
How do I adjust the stitch length and width?
Use the dials on the front of the machine. The top dial adjusts stitch length (0-4 mm) and the bottom dial adjusts stitch width (0-5 mm). Turn to the desired number for different fabrics.
Why is my machine skipping stitches?
Skipped stitches can be caused by a blunt or bent needle, incorrect threading, or improper tension. Try replacing the needle (size 80/12 for medium fabrics), rethread the upper thread, and adjust tension.
How do I clean and maintain the machine?
Regularly remove the needle plate and clean the bobbin area with a soft brush. Do not use compressed air. Oil only if specified in the manual, usually once a year. Keep the machine covered when not in use.
Can I sew denim or heavy fabrics with this machine?
Yes, but use a heavy-duty needle (size 90/14 or 100/16) and adjust stitch length to 3-4 mm. Go slowly and use the handwheel for tough spots.
How do I use the automatic buttonhole function?
Attach the buttonhole foot, select the buttonhole stitch (usually mark #), set the button size using the slider, and lower the foot. The machine will sew all four sides automatically. Do not pull the fabric.
What should I do if the machine jams?
Turn off and unplug. Remove the needle plate and carefully cut any tangled threads. Check the bobbin area for lint and rethread both upper and lower threads. If persistent, seek professional service.
User questions about Disney SM1738D BROTHER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Sewing machine in PDF format for free! Find your manual Disney SM1738D - BROTHER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Disney SM1738D by BROTHER.