Vitek

VTC-C770WDRIP2 - Video camera Vitek - Free user manual and instructions

Find the device manual for free VTC-C770WDRIP2 Vitek in PDF.

📄 48 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Vitek VTC-C770WDRIP2 - page 4
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Analog HD Surveillance Camera
Image Sensor 1/3" CMOS, 1.3 Megapixel
Effective Resolution 1280 x 720 (720p)
Video Output HD-TVI, CVBS (switchable)
Wide Dynamic Range True WDR, up to 120dB
Lens Fixed 2.8mm, F1.8
Day/Night Mechanical IR cut filter, auto switch
Minimum Illumination 0.01 lux (color), 0 lux (IR on)
IR Distance Up to 30 meters (IR LEDs)
Power Supply 12V DC, 500mA (included adapter)
Power Consumption < 6W
Dimensions (L x W x H) 200 mm x 70 mm x 70 mm
Weight 0.5 kg
Housing / Weatherproof Aluminum, IP66 rated
Operating Temperature -30°C to 60°C
Signal-to-Noise Ratio ≥ 52 dB
Functions Motion detection, privacy masking, day/night, DNR
Cleaning & Maintenance Wipe with soft, dry cloth. Avoid solvents.
Safety Precautions Use provided power adapter; disconnect before cleaning.
Spare Parts & Repairability No user-serviceable parts. Contact Vitek support.
General Information Vitek VTC-C770WDRIP2, designed for indoor/outdoor surveillance.

Frequently Asked Questions - VTC-C770WDRIP2 Vitek

How do I connect the VTC-C770WDRIP2 to my DVR?
Connect the BNC output of the camera to a BNC input on your DVR using a 75-ohm coaxial cable. For HD signals, ensure your DVR supports HD-TVI. Power the camera with the included 12V DC adapter.
What is the maximum cable length for the camera?
For 720p HD-TVI signal, you can use up to 300 meters (1000 ft) of RG59 coaxial cable. For longer distances, consider using an active video balun or a signal booster.
How do I adjust the camera's settings?
The camera uses an OSD (on-screen display) menu. Access it via the DVR's PTZ control (usually button 'Enter' or 'Menu' on the DVR remote). Navigate options like exposure, day/night, WDR, and privacy masking.
My camera shows no image at night. What could be wrong?
Check if the IR LEDs are lit. If not, the camera may be in day mode. Ensure the day/night mode is set to 'Auto' in OSD. Also verify that the IR cut filter is switching properly. Clean the lens dome and check power supply voltage.
Is the camera weatherproof?
Yes, the VTC-C770WDRIP2 has an IP66 rating, meaning it is protected against dust and powerful water jets. It can be used outdoors, but ensure all connections are sealed with waterproof tape.
What power supply does the camera need?
Use the included 12V DC, 500mA adapter. Do not use a different voltage, as it may damage the camera. For multiple cameras, use a centralized power supply with sufficient total current.
Can I use this camera with a digital recorder (NVR)?
The camera outputs analog HD-TVI and standard CVBS, so it is not directly compatible with IP NVRs. You would need a video encoder to convert the signal, or use a hybrid DVR that supports HD-TVI.
How do I reset the camera to factory defaults?
Access the OSD menu through the DVR, navigate to 'System' or 'Setup', and select 'Factory Default' or 'Load Default'. Confirm the reset. Note that event presets will be lost.
What is the field of view of the fixed lens?
The 2.8mm lens provides a horizontal field of view of approximately 95 degrees, suitable for wide-area coverage such as rooms or doors.
How do I clean the camera lens safely?
Use a soft, lint-free cloth slightly dampened with water or a mild glass cleaner. Gently wipe the lens in a circular motion. Avoid abrasive materials, as they can scratch the lens coating.

User questions about VTC-C770WDRIP2 Vitek

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Video camera in PDF format for free! Find your manual VTC-C770WDRIP2 - Vitek and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VTC-C770WDRIP2 by Vitek.

USER MANUAL VTC-C770WDRIP2 Vitek

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Vitek

Model : VTC-C770WDRIP2

Category : Video camera