JC-0895 - Ice machine Manitowoc - Free user manual and instructions
Find the device manual for free JC-0895 Manitowoc in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Modular Ice Machine |
| Ice Type | Cubelet Ice |
| Ice Production | Up to 800 lbs (363 kg) per 24 hours |
| Storage Capacity | Requires separate ice storage bin (not included) |
| Condenser Type | Air-cooled |
| Refrigerant | R-404A |
| Electrical Requirements | 115 V, 60 Hz, 1-phase, 15 A |
| Dimensions (W x D x H) | 30 x 27.5 x 37 inches (762 x 699 x 940 mm) |
| Weight | 230 lbs (104 kg) |
| Ice Size | 7/8\" x 7/8\" x 3/8\" (22 x 22 x 10 mm) |
| Water Supply | 1/4\" male flare, 20-80 psi (138-552 kPa) |
| Drain Connection | 3/4\" female NPT |
| Ambient Temperature Range | 50-100°F (10-38°C) |
| Water Temperature Range | 40-100°F (4-38°C) |
| Sound Level | < 60 dB |
| Certifications | NSF, UL, CE |
| Cleaning | Automatic cleaning cycle; recommended every 6 months |
| Safety Features | High-pressure cut-off, freeze-up protection |
| Warranty | 3 years parts and labor |
| Material | Stainless steel front and sides |
| Control | Electronic control board with diagnostic LEDs |
Frequently Asked Questions - JC-0895 Manitowoc
How often should I clean my Manitowoc JC-0895 ice machine?
It is recommended to clean the ice machine every 6 months using an approved cleaner. Follow the automatic cleaning cycle instructions in the manual.
What type of water filter is required?
Use a Manitowoc water filter (e.g., model 3000 or 5000) to reduce scale and improve ice quality. Replace every 6 months or as indicated.
Why is my ice machine not producing ice?
Common causes include: power supply issues, water supply shut off, dirty condenser, or low refrigerant. Check error codes on the control board.
How often should I clean the condenser?
Clean the air-cooled condenser every 3 months using a soft brush or vacuum. A dirty condenser reduces efficiency and can cause shutdown.
What is the recommended water pressure?
Water pressure should be between 20 and 80 psi (138-552 kPa). Use a pressure regulator if needed.
How do I adjust the ice thickness?
Ice thickness can be adjusted via the control board dip switches or settings. Refer to the manual for specific adjustment steps. Typically, thicker ice is achieved by increasing the freeze time.
How do I reset the machine after an error?
Press the reset button on the control board or cycle power off for 30 seconds. If the error persists, consult the error code table in the manual.
Can I install the JC-0895 outdoors?
This model is designed for indoor use only. Outdoor installation may void warranty and cause damage due to temperature extremes.
What is the warranty period?
Manitowoc offers a 3-year parts and labor warranty on the JC-0895. Registration is required. Extended warranties may be available.
How to winterize the ice machine if not in use?
Drain the water system completely, unplug the unit, and clean the interior. Store in a freeze-free environment. Do not operate below freezing.
User questions about JC-0895 Manitowoc
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Ice machine in PDF format for free! Find your manual JC-0895 - Manitowoc and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. JC-0895 by Manitowoc.
USER MANUAL JC-0895 Manitowoc
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Manitowoc
Model : JC-0895
Category : Ice machine