JC-1395 - Ice machine Manitowoc - Free user manual and instructions
Find the device manual for free JC-1395 Manitowoc in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Modular Ice Machine |
| Model | JC-1395 |
| Brand | Manitowoc |
| Ice Production | Up to 1,390 lbs (630 kg) per 24 hours |
| Ice Type | Dice (full or half cube) |
| Condenser Type | Air-cooled or remote condenser (depending on configuration) |
| Dimensions (Head Only) | 30 in (762 mm) width x 30 in (762 mm) depth x 28 in (711 mm) height |
| Weight (Head Only) | Approximately 230 lbs (104 kg) |
| Electrical Supply | 115V / 60 Hz / 1-phase, or 208-230V / 60 Hz / 1-phase (check model plate) |
| Amperage | 15 A (at 115V) or 10 A (at 208-230V) |
| Water Supply | Potable water, 1/4" line, max 80 psi |
| Refrigerant | R-404A (check specific model) |
| Ice Storage Bin Compatibility | Designed for Manitowoc B-250 or similar bin |
| Self-Cleaning Feature | Yes, AutoClean™ or similar (refer to manual) |
| Control Panel | Digital display with status indicators and diagnostic LEDs |
| Ice Thickness Adjustment | Adjustable via control board or dip switches |
| Condenser Coil Cleaning | Recommended every 6 months; accessible from front |
| Warranty | 3 years parts and labor, 5 years compressor (varies by region) |
| Certifications | UL, NSF, cUL (typical) |
Frequently Asked Questions - JC-1395 Manitowoc
How do I clean the Manitowoc JC-1395 ice machine?
Use Manitowoc approved Ice Machine Cleaner. Turn off the machine, remove ice, and run the cleaning cycle as described in the manual. Rinse thoroughly before restarting.
Why is the ice machine not producing ice?
Check power supply, water supply, and the bin full or off-cycle indicator. Also inspect the condenser coil for dirt and ensure the air filter is clean. Refer to diagnostic LEDs on the control panel.
How do I adjust ice cube size?
Ice thickness can be adjusted via the control board dip switches or a potentiometer. Thicker cubes result in slower production. Consult the manual for the exact procedure.
What error code means on the display?
Common codes: E1 (high pressure), E2 (low pressure), E3 (fan fault), E4 (water inlet issue). Refer to the error code chart in the manual for detailed troubleshooting.
How often should I clean the condenser coil?
At least every 6 months. In dusty environments, clean more frequently. Use a soft brush or vacuum to remove debris from the fins.
Can I use a remote condenser with this model?
Yes, the JC-1395 is available in both air-cooled and remote condenser versions. Ensure the correct model variant is selected and install per local codes.
What is the recommended water filtration?
A water filter is strongly recommended to reduce scale and improve ice quality. Manitowoc offers filtration kits. Replace filter every 6-12 months.
How do I perform a manual defrost?
To initiate a manual defrost, press and hold the defrost button on the control panel for 5 seconds. This helps remove frost from the evaporator if needed.
What refrigerant does the JC-1395 use?
The typical refrigerant is R-404A. Check the model plate for exact type and charge amount. Only a qualified technician should handle refrigerant.
Where can I find the user manual?
The manual is available for free download on notice-facile.com in PDF format. Search for 'Manitowoc JC-1395' to locate it.
User questions about JC-1395 Manitowoc
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Ice machine in PDF format for free! Find your manual JC-1395 - Manitowoc and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. JC-1395 by Manitowoc.
USER MANUAL JC-1395 Manitowoc
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Manitowoc
Model : JC-1395
Category : Ice machine