D-951 - Range hood Rommer - Free user manual and instructions
Find the device manual for free D-951 Rommer in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Range Hood |
| Brand | Rommer |
| Model | D-951 |
| Dimensions (W x D x H) | 598 mm x 500 mm x 145 mm |
| Weight | 12 kg |
| Power Supply | 220-240 V, 50 Hz |
| Energy Class | B |
| Noise Level | 55 dB (max speed) |
| Control Type | Push button |
| Number of Speeds | 3 |
| Extraction Capacity | 650 m³/h |
| Lighting | LED, 2 x 3 W |
| Filter Type | Aluminum grease filter (washable); optional charcoal filter |
| Duct Diameter | 150 mm |
| Exhaust Mode | Ducted or recirculation |
| Maintenance | Clean grease filter every 2 months; replace charcoal filter every 6 months |
| Safety Features | Overheating protection, safety switch |
| Spare Parts | Grease filter, charcoal filter, LED bulbs |
Frequently Asked Questions - D-951 Rommer
How do I install the Rommer D-951 range hood?
Install the hood at a minimum distance of 65 cm above the cooking surface. Ensure the wall is load-bearing. Connect the duct to a 150 mm outlet. Refer to the manual for detailed steps.
How often should I clean the grease filter?
Clean the aluminum grease filter every 2 months with warm soapy water or in the dishwasher. Dry thoroughly before reinstalling.
How do I replace the charcoal filter?
Replace the charcoal filter every 6 months. Remove the grease filter, slide out the old charcoal filter, and insert a new one. Ensure it is locked in place.
Why is my range hood noisy?
Noise can be due to loose ducts, dirty filters, or a blocked motor. Check all connections and clean the filters. If noise persists, contact support.
Can I use the hood in recirculation mode?
Yes, the D-951 can be used in recirculation mode. You need to install a charcoal filter (sold separately). The air will be filtered and returned to the kitchen.
What light bulb does the hood use?
The hood uses LED bulbs (2 x 3 W). To replace, gently pry off the light cover and twist out the old bulb. Insert a new one and secure the cover.
How do I adjust the fan speed?
Use the push button control panel to select between three speed levels. Speed 1 for low, speed 2 for medium, and speed 3 for high extraction.
What should I do if the hood stops working?
Check the power supply, ensure the main switch is on, and inspect the fuse. If the problem persists, contact customer service. Do not attempt to repair the motor yourself.
Is the hood suitable for induction hobs?
Yes, the hood can be used above induction, electric, and gas hobs. For gas hobs, maintain a minimum distance of 75 cm.
How do I obtain spare parts?
Spare parts like filters and bulbs can be purchased from authorized distributors. Visit the Rommer website or contact support for genuine parts.
User questions about D-951 Rommer
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual D-951 - Rommer and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. D-951 by Rommer.
USER MANUAL D-951 Rommer
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Rommer
Model : D-951
Category : Range hood