APE08AK - Air conditioner GE - Free user manual and instructions
Find the device manual for free APE08AK GE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Window Air Conditioner |
| Brand | GE |
| Model | APE08AK |
| Cooling Capacity (BTU) | 8,000 BTU |
| Covered Area (sq. ft.) | Up to 350 sq. ft. |
| Energy Efficiency Ratio (EER) | 11.0 |
| Voltage | 115 V |
| Frequency | 60 Hz |
| Amperage | 7.5 A |
| Plug Type | 5-15P (Standard 3-prong) |
| Dimensions (W x H x D) | 18.5 in x 14.8 in x 12.2 in |
| Weight | 45 lbs |
| Air Flow (CFM) | 200 CFM |
| Modes | Cool, Fan, Energy Saver |
| Fan Speeds | 2 (Low, High) |
| Thermostat | Digital, programmable |
| Filter Type | Washable mesh filter |
| Refrigerant | R-32 |
| Noise Level (dB) | 56 dB |
| Energy Star Certified | Yes |
| Installation Type | Window mount |
| Remote Control | Included |
| Safety Features | Overheat protection, auto restart |
| Maintenance | Clean filter every 2 weeks |
Frequently Asked Questions - APE08AK GE
How do I install the GE APE08AK air conditioner?
Place the unit in a window that opens vertically. Secure the side panels and lower the window sash. Use the included bracket for extra support. Plug into a grounded outlet. Refer to the installation manual for detailed steps.
How often should I clean the filter?
Clean the washable filter every two weeks during heavy use. Remove the front grille, take out the filter, rinse with water, and let it dry completely before reinserting.
What does the 'E' error code mean?
The 'E' code indicates a sensor or communication error. Try unplugging the unit for 5 minutes to reset. If it persists, contact GE support.
Can I use an extension cord?
No, do not use an extension cord. The unit requires a dedicated 115V outlet. Using an extension cord can cause voltage drop and safety hazards.
How do I set the timer?
Press the Timer button on the remote or control panel. Use the + and - buttons to set the desired time (1-24 hours). The unit will turn on or off after the set time.
Why is my air conditioner not cooling?
Check if the filter is dirty, the thermostat is set correctly, and the window is properly sealed. Also ensure the unit is not oversized for the room.
What is the recommended room size for this model?
The GE APE08AK is designed for rooms up to 350 square feet (about 20x18 ft). Using it in a smaller room may cause short cycling.
How do I switch between cool and fan mode?
Press the Mode button on the remote or control panel. Cycle through Cool, Fan, and Energy Saver modes. The fan mode circulates air without cooling.
Does this unit have a dehumidifier function?
Yes, the unit removes moisture as it cools. In Fan mode, it does not dehumidify. For dedicated dehumidification, select Cool mode with a lower fan speed.
Can I use the remote if I lose it?
Yes, you can operate the unit using the control panel on the front. Replacement remotes are available from GE parts distributors.
User questions about APE08AK GE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air conditioner in PDF format for free! Find your manual APE08AK - GE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. APE08AK by GE.
USER MANUAL APE08AK GE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : GE
Model : APE08AK
Category : Air conditioner