Running Order - Uncategorized Endorphin.es - Free user manual and instructions
Find the device manual for free Running Order Endorphin.es in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Eurorack Module |
| Brand | Endorphin.es |
| Model | Running Order |
| Category | Uncategorized |
| Width | 6 HP |
| Depth | 25 mm (including power header) |
| Weight | Approx. 80 g |
| Power Supply | +12V: 50 mA, -12V: 20 mA |
| Power Connector | 10-pin ribbon cable (reverse polarity protected) |
| Main Functions | Clock-synchronized sample playback, trigger sequencing |
| Audio Input | 1 x 3.5 mm jack (mono, impedance 100 kΩ) |
| Audio Output | 1 x 3.5 mm jack (mono, impedance 1 kΩ) |
| Control Inputs | Clock, Reset, and CV inputs (3.5 mm, 0-5V) |
| Controls | Rotary encoder with push button, 3 toggle switches |
| Indicators | 10-step LED bar, power LED |
| Materials | PCB: FR4, Panel: Aluminum, Knobs: ABS |
| Safety Precautions | Do not expose to moisture; disconnect power before patching |
| Maintenance | Clean panel with dry cloth; avoid contact with solvents |
| Spare Parts | Knobs, potentiometers, jacks available from manufacturers |
| Repairability | Module can be opened by removing 4 screws; no user-serviceable components |
| Warranty | 2 years limited warranty (check with dealer) |
| Manual Language | English (original) |
| Additional Information | Firmware updates via SD card (not included) |
Frequently Asked Questions - Running Order Endorphin.es
How do I connect the Running Order module to my eurorack case?
Use a 10-pin ribbon cable to connect the module's power header to your case's bus board. Ensure the red stripe aligns with the -12V side as indicated on the module.
What are the typical applications of Running Order?
It is ideal for clock-synchronized sample playback, trigger sequencing, and creating rhythmic patterns in modular setups.
Can I use Running Order without an external clock?
Yes, it has an internal clock that can be set via the encoder, but external clock input provides synchronization with other modules.
How do I update the firmware?
Download the latest firmware from Endorphin.es website, copy to an SD card (FAT32), insert into the module's SD slot while holding the encoder button, and power on.
What is the maximum sample length?
Each sample can be up to 2 seconds long at 16-bit/44.1 kHz, stored in WAV format.
How do I reset the sequence?
Apply a gate signal to the Reset input to restart the sequencer from step one. Alternatively, press and hold the encoder button for 2 seconds.
Can I chain multiple Running Order modules?
Yes, by connecting the Clock and Reset outputs/inputs, you can synchronize multiple modules for larger sequences.
What should I do if the module doesn't power on?
Check the ribbon cable orientation and power supply voltage. Ensure the module draws less than your case's total capacity. If problem persists, contact support.
How do I clean the module?
Disconnect power and wipe the panel with a soft, dry cloth. For stubborn stains, slightly dampen cloth with water only. Do not use alcohol or solvents.
Is Running Order compatible with other brands of eurorack modules?
Yes, it conforms to eurorack standards (CV/gate levels, power) and works with all modules that follow the Doepfer specification.
User questions about Running Order Endorphin.es
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual Running Order - Endorphin.es and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Running Order by Endorphin.es.
USER MANUAL Running Order Endorphin.es
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Endorphin.es
Model : Running Order
Category : Uncategorized