ACP-12CH35AEF - Air conditioner Vivax - Free user manual and instructions
Find the device manual for free ACP-12CH35AEF Vivax in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Portable Air Conditioner |
| Model | ACP-12CH35AEF |
| Brand | Vivax |
| Cooling Capacity | 12,000 BTU (3.5 kW) |
| Heating Capacity | 12,000 BTU (3.5 kW) |
| Energy Efficiency Ratio (EER) | 3.0 W/W |
| Refrigerant | R410A |
| Power Supply | 220-240 V, 50 Hz |
| Rated Power Input (Cooling) | 1,200 W |
| Rated Power Input (Heating) | 1,200 W |
| Air Flow Rate | 350 m³/h |
| Noise Level (Low/High) | 45 / 55 dB(A) |
| Dimensions (W x D x H) | 45 x 38 x 75 cm |
| Net Weight | 28 kg |
| Timer | 24-hour programmable timer |
| Remote Control | Included |
| Air Purification | Washable filter |
| Dehumidification | Up to 1.2 L/h |
| Installation | Includes window kit for exhaust hose |
| Safety Features | Overheat protection, auto restart |
| Maintenance | Clean filter every 2 weeks |
| Spare Parts Availability | Filters, remote, wheels available from service center |
Frequently Asked Questions - ACP-12CH35AEF Vivax
How do I install the exhaust hose for the air conditioner?
Insert the hose into the window kit, extend it to fit the window opening, and secure it with the provided brackets. Ensure the window kit is properly sealed to prevent hot air from entering.
How often should I clean the air filter?
Clean the air filter every two weeks under normal use. Remove the filter from the back of the unit, wash with lukewarm water, and let it dry completely before reinstalling.
Why is my air conditioner not cooling effectively?
Check if the air filter is clogged, the exhaust hose is properly sealed, the room is not too large for the unit's capacity, and the set temperature is lower than the room temperature. Also ensure the compressor is running.
What does the error code E1 mean?
Error code E1 indicates a room temperature sensor malfunction. Turn off the unit and unplug it for 10 minutes. If the error persists, contact Vivax support.
How do I use the remote control?
Point the remote at the unit's receiver. Press MODE to select Cool, Heat, Fan, or Dry. Use TEMP buttons to adjust temperature. The TIMER button sets auto on/off.
Can I use an extension cord with this air conditioner?
No, do not use an extension cord. Plug the unit directly into a properly grounded wall outlet rated for the power requirements (220-240V, 10A).
What is the recommended room size for this air conditioner?
The ACP-12CH35AEF is suitable for rooms up to 30 m² (approximately 320 sq ft) with normal ceiling height.
How do I switch between cooling and heating?
Press the MODE button on the remote or unit until the display shows the desired mode: snowflake for cooling, sun for heating.
The unit turns off by itself. What should I do?
Check if the timer is set. If not, the unit may have reached the set temperature or the auto-off safety feature may have activated due to overheating. Clean the filter and ensure proper ventilation.
Where can I find spare parts like the filter or remote?
Spare parts are available through Vivax authorized service centers. Refer to the warranty card for contact details or visit the Vivax website.
User questions about ACP-12CH35AEF Vivax
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air conditioner in PDF format for free! Find your manual ACP-12CH35AEF - Vivax and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ACP-12CH35AEF by Vivax.
USER MANUAL ACP-12CH35AEF Vivax
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Vivax
Model : ACP-12CH35AEF
Category : Air conditioner