ASM10AK - Air conditioner GE - Free user manual and instructions
Find the device manual for free ASM10AK GE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Window Air Conditioner |
| Brand | GE |
| Model | ASM10AK |
| Cooling Capacity | 10,000 BTU |
| Energy Efficiency | EER 12.0 |
| Voltage | 115 V |
| Frequency | 60 Hz |
| Current Draw | 8.5 A |
| Refrigerant Type | R-32 |
| Dimensions (W x H x D) | 23.6 x 18.5 x 14.2 inches |
| Weight | 62 lbs |
| Airflow (High) | 250 CFM |
| Dehumidification | 2.0 pints per hour |
| Noise Level | 56 dBA (indoor) |
| Thermostat Control | Mechanical dial |
| Remote Control | Yes, included |
| Filter Type | Washable foam filter |
| Maintenance | Clean filter every 30 days |
| Safety Features | Anti-theft bracket, restart delay |
| Installation Type | Window mount (requires kit) |
| Warranty | 1 year limited |
Frequently Asked Questions - ASM10AK GE
How to install the air conditioner?
Follow the installation guide included in the manual. Place the unit in a suitable window, extend the side panels, and secure with the provided brackets and screws. Ensure the window is sealed to prevent hot air from entering.
How do I clean the filter?
Remove the filter from the front panel. Wash it with mild soap and water, then dry thoroughly before reinstalling. Clean the filter every 30 days for optimal performance.
How to use the remote control?
Insert two AAA batteries (not included). Point the remote at the unit and press Power to turn on/off. Use Mode to select Cool, Fan, or Dry. Adjust temperature and fan speed with the corresponding buttons.
What does the 'CL' error code mean?
The 'CL' code indicates a short circuit in the control board. Unplug the unit for 5 minutes, then plug it back in. If the code persists, contact customer support.
How to drain water from the unit?
In dry mode or high humidity, water may accumulate. Locate the drain plug at the back of the unit. Place a shallow pan under it and remove the plug to drain. Replace the plug afterward.
Can I use an extension cord?
No. Use only a direct power outlet. Extension cords can cause voltage drop and safety hazards. If the cord is too short, have a qualified electrician install an outlet closer.
How to set the timer?
The timer function can be set via remote. Press the Timer button repeatedly to set the desired hours (1-24). The unit will turn on/off after the preset time.
Why is the unit not cooling sufficiently?
Check if the filter is dirty, if the airflow is blocked, or if the window is not properly sealed. Also ensure the unit is not too large for the room size (10,000 BTU covers up to 450 sq ft).
How to adjust the louver direction?
Manually adjust the horizontal louvers by moving the lever on the front panel. For vertical direction, gently tilt the louvers up or down as needed.
How to store the unit in winter?
Remove the unit from the window, clean the filter and coils, drain all water, and store in a dry place. Cover it to protect from dust. Install again in spring following the installation guide.
User questions about ASM10AK GE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air conditioner in PDF format for free! Find your manual ASM10AK - GE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ASM10AK by GE.
USER MANUAL ASM10AK GE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : GE
Model : ASM10AK
Category : Air conditioner