RT-16 - Remote trigger Bolt - Free user manual and instructions
Find the device manual for free RT-16 Bolt in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless Remote Trigger |
| Brand | Bolt |
| Model | RT-16 |
| Dimensions | 5.0 x 3.0 x 1.0 cm |
| Weight | 20 g (including battery) |
| Power Source | 1 x CR2032 3V lithium battery |
| Battery Life | Approximately 12 months under normal use |
| Wireless Range | Up to 30 meters (98 feet) in open area |
| Frequency | 2.4 GHz |
| Compatibility | Cameras with 2.5 mm remote shutter jack (most Canon, Nikon, Sony, etc.) |
| Functions | Half-press for autofocus, full-press for shutter, continuous/Burst mode, timed delay |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Construction Material | ABS plastic with rubberized coating |
| Color | Black |
| Included Accessories | Remote trigger unit, receiver unit, lanyard, CR2032 battery (installed), user manual |
| Maintenance & Cleaning | Wipe with a soft, dry cloth. Do not use liquid cleaners. |
| Safety Precautions | Keep away from water and extreme heat; remove battery if not used for extended periods. |
| Spare Parts | CR2032 batteries (widely available) |
| Reparability | Not user-serviceable; contact dealer for repairs. |
Frequently Asked Questions - RT-16 Bolt
How do I pair the remote trigger with my camera?
Insert the receiver into your camera's remote port (2.5 mm jack). Turn on both the transmitter and receiver. They are pre-paired out of the box. If not, press the pairing button on both units simultaneously.
What type of battery does the remote use?
It uses a CR2032 3V lithium coin battery, which is included and pre-installed. Replacement batteries are widely available.
How do I replace the battery?
Slide off the battery compartment cover on the transmitter (or receiver) and replace the old battery with a new CR2032, ensuring correct polarity (+ up).
What is the maximum operating range?
The wireless range is up to 30 meters (98 feet) in open line-of-sight conditions. Walls and obstacles can reduce range.
Is this remote compatible with my camera?
The RT-16 works with cameras that have a 2.5 mm remote shutter jack. Many Canon, Nikon, Sony, Olympus, and other brands support this standard. Check your camera manual for remote port type.
How do I use half-press to focus?
Press the shutter button on the remote halfway down to activate autofocus. A full press triggers the shutter. Some cameras require the remote to be set to 'Remote' mode.
Can I use the remote for bulb/long exposure?
Yes, press and hold the shutter button for the desired exposure time. Release to close the shutter. For timed exposures, use the camera's bulb mode.
The remote doesn't trigger the camera. What should I check?
First, ensure the receiver is fully inserted into the camera's remote jack. Check the battery in both units. Verify that the camera is turned on and not in a mode that disables the remote (e.g., some cameras have a 'Remote' setting). Re-pair if necessary.
How do I clean the remote?
Wipe the exterior with a soft, dry cloth. Do not use water, solvents, or abrasive cleaners. Keep the battery contacts dry.
Is the remote weather-resistant?
No, the RT-16 is not waterproof or weather-resistant. Avoid using it in rain or high humidity. Store in a dry place.
User questions about RT-16 Bolt
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Remote trigger in PDF format for free! Find your manual RT-16 - Bolt and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. RT-16 by Bolt.
USER MANUAL RT-16 Bolt
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Bolt
Model : RT-16
Category : Remote trigger