VM-1020 - Remote trigger Bolt - Free user manual and instructions
Find the device manual for free VM-1020 Bolt in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Remote Shutter Release |
| Brand | Bolt |
| Model | VM-1020 |
| Dimensions | 5.0 x 3.0 x 1.0 cm (2.0 x 1.2 x 0.4 in) |
| Weight | 30 g (1.1 oz) |
| Power Source | 1 x CR2032 3V lithium battery (included) |
| Wireless Range | Up to 10 m (33 ft) in open space |
| Compatibility | Cameras with 2.5 mm remote jack (most DSLRs and mirrorless) |
| Key Functions | Shutter release, half-press autofocus, bulb mode lock |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Storage Temperature | -20°C to 60°C (-4°F to 140°F) |
| Material | ABS plastic with rubberized grip |
| Wireless Type | Radio frequency (RF) 2.4 GHz |
| Indicator | LED for power and signal status |
| Maintenance | Wipe with dry cloth; avoid solvents |
| Safety | Keep away from water and extreme heat |
| Spare Parts & Repairability | User-replaceable battery only; no serviceable parts inside |
| General Information | Includes remote trigger, receiver, CR2032 battery, and user manual |
Frequently Asked Questions - VM-1020 Bolt
How do I pair the remote trigger with my camera?
Insert the receiver into your camera's remote jack, then turn on the remote. The LED will flash quickly and then stay solid when paired. If not, press the pairing button on the receiver and then the shutter button on the remote.
What type of battery does the Bolt VM-1020 use?
It uses a CR2032 3V lithium battery. Pull out the battery tray on the remote and insert the battery with the + side up.
What is the maximum operating range?
The range is up to 10 meters (33 feet) in open line of sight. Walls and obstacles may reduce the range.
Is the Bolt VM-1020 compatible with my smartphone or tablet?
No, this remote is designed for DSLR and mirrorless cameras with a 2.5mm remote jack. It does not connect to phones via Bluetooth or Wi-Fi.
How do I use the bulb mode for long exposures?
Press and hold the shutter button on the remote. For bulb mode, slide the lock switch on the side of the remote to hold the shutter open. Slide it back to release.
What should I do if the remote isn't triggering the camera?
First, check that the receiver is fully inserted into the camera's remote jack. Ensure the remote and receiver have fresh batteries. Re-pair by holding the button on the receiver and pressing the remote's shutter. Also verify your camera's remote release settings are enabled.
Is the remote waterproof or weather-resistant?
No, it is not waterproof. Keep it away from rain, moisture, and extreme conditions. The rubberized grip provides some protection but do not submerge.
How do I clean the remote trigger?
Use a soft, dry cloth to wipe the exterior. Do not use liquids or abrasive cleaners. Ensure the battery contacts are clean if needed.
Can I use the remote without a receiver?
No, the receiver is required to connect the wireless signal to your camera. It plugs into the camera's remote port.
What is the warranty period for the Bolt VM-1020?
Bolt offers a 1-year limited warranty against manufacturing defects. Keep your receipt as proof of purchase.
User questions about VM-1020 Bolt
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Remote trigger in PDF format for free! Find your manual VM-1020 - Bolt and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VM-1020 by Bolt.
USER MANUAL VM-1020 Bolt
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Bolt
Model : VM-1020
Category : Remote trigger