992 - Synthesizer BEHRINGER - Free user manual and instructions
Find the device manual for free 992 BEHRINGER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type | Analog Synthesizer |
| Model | 992 |
| Brand | Behringer |
| Dimensions (W x D x H) | 210 x 150 x 55 mm (8.3 x 5.9 x 2.2 in) |
| Weight | 0.45 kg (1.0 lb) |
| Power Supply | 9V DC, center negative, 200 mA |
| Audio Output | 1 x 1/4" TS mono jack |
| Audio Input | 1 x 1/4" TS mono jack (external audio) + 1 x XLR/TS combo (microphone) |
| MIDI I/O | 5-pin DIN In/Out/Thru |
| USB | USB-B for firmware updates and MIDI |
| Number of Keys | None (module) |
| Polyphony | Monophonic |
| Oscillators | 2 voltage-controlled oscillators (VCO) with saw, square, triangle, sine |
| Filter | 4-pole low-pass VCF with resonance |
| Envelope | ADSR envelope generator |
| LFO | 1 LFO with triangle, saw, square, sample & hold |
| Presets | 100 factory presets, 100 user presets |
| Display | 2-digit LED display for preset number |
| Construction | Desktop module, metal chassis |
| Maintenance | Wipe with a dry, lint-free cloth. Avoid solvents. |
| Safety | Do not expose to rain or moisture. Use only supplied power adapter. |
| Spare Parts & Repairability | Contact Behringer support for service. No user-serviceable parts inside. |
Frequently Asked Questions - 992 BEHRINGER
How do I connect the Behringer 992 to a computer?
Use a USB-B cable to connect the 992 to your computer. It will appear as a MIDI device. You may need to install drivers from Behringer's website for Windows.
Can I use the 992 as a standalone vocoder?
Yes, the 992 includes a vocoder function. Connect a microphone to the XLR input and an audio source to the line input. The vocoder uses the audio source as the carrier and your voice as the modulator.
How do I update the firmware on the 992?
Download the latest firmware from the Behringer website. Connect the 992 via USB to a computer, put the device in update mode (hold a button while powering on), and run the updater software.
What power supply does the Behringer 992 use?
It uses a 9V DC power supply with center negative polarity, rated at least 200 mA. Do not use any other adapter.
Is the Behringer 992 analog or digital?
The 992 is an analog synthesizer with voltage-controlled oscillators and filters, but it includes a digital effect section and preset memory.
How many presets does the 992 have?
It comes with 100 factory presets and space for 100 user presets, accessible via the number buttons and LED display.
Can I control the 992 with a MIDI keyboard?
Yes, you can connect any standard MIDI controller via the 5-pin MIDI input. The 992 responds to note on/off, velocity, pitch bend, modulation, and other CC messages.
How do I clean the Behringer 992?
Use a slightly damp, lint-free cloth to wipe the surface. Avoid getting moisture into any openings. Do not use abrasive cleaners or solvents.
What should I do if the 992 has no sound?
Check the power supply, audio cable connections, and volume settings. Ensure the master volume and filter cutoff are turned up. Try a factory reset or contact support.
Where can I find spare parts for the Behringer 992?
Spare parts are not sold directly to consumers. Contact Behringer's authorized service centers for repairs. Attempting to open the device voids the warranty.
User questions about 992 BEHRINGER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Synthesizer in PDF format for free! Find your manual 992 - BEHRINGER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 992 by BEHRINGER.
USER MANUAL 992 BEHRINGER
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : BEHRINGER
Model : 992
Category : Synthesizer