CVL-B/C-TQG - Microphone SHURE - Free user manual and instructions
Find the device manual for free CVL-B/C-TQG SHURE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Condenser Boundary Microphone |
| Model | CVL-B/C-TQG |
| Brand | Shure |
| Polar Pattern | Cardioid |
| Frequency Response | 50 Hz - 20 kHz |
| Impedance | 150 Ω |
| Sensitivity | -37 dBV/Pa |
| Maximum SPL | 120 dB SPL |
| Signal-to-Noise Ratio | 67 dB |
| Power Requirement | Phantom power 11-52 V |
| Connector | 3-pin XLR male (TQG) or captive cable |
| Dimensions (H x W x D) | 23 x 108 x 67 mm |
| Weight | 100 g |
| Main Functions | Speech pickup, conferencing, boardroom recording |
| Cleaning & Maintenance | Clean with a soft dry cloth. Avoid solvents. |
| Safety | Keep away from liquids. Do not disassemble. |
| Spare Parts & Reparability | No user-serviceable parts. Contact Shure for service. |
| General Information | Designed for flush-mount installation on conference tables or stages. |
Frequently Asked Questions - CVL-B/C-TQG SHURE
What is the polar pattern of the Shure CVL-B/C-TQG?
The Shure CVL-B/C-TQG features a cardioid polar pattern, which picks up sound primarily from the front while rejecting noise from the sides and rear.
Does the CVL-B/C-TQG require phantom power?
Yes, it requires phantom power from 11 to 52 volts DC, typically supplied by a mixer or audio interface.
What is the frequency response of this microphone?
The frequency response is 50 Hz to 20 kHz, suitable for speech and general audio pickup.
How do I clean the CVL-B/C-TQG microphone?
Use a soft, dry cloth to wipe the exterior. Avoid using solvents or liquids that could damage the electronics.
What is the typical application for this mic?
It is designed for conference tables, boardrooms, and stage floors where a low-profile, flush-mount microphone is needed.
What connector type does it have?
It typically uses a 3-pin XLR male (TQG variant) or a captive cable, depending on the version.
Can I use this microphone outdoors?
It is not weatherproof and should be kept dry. Use a windscreen if outdoor use is necessary.
What is the maximum SPL the microphone can handle?
The maximum SPL is 120 dB SPL, allowing it to handle loud sound sources without distortion.
Is the microphone shielded from electromagnetic interference?
Yes, it features a rugged metal housing that provides protection against RF and electromagnetic interference.
How do I mount the CVL-B/C-TQG?
It is designed to be flush-mounted into a hole cut into a table or floor. A mounting kit may be included.
User questions about CVL-B/C-TQG SHURE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Microphone in PDF format for free! Find your manual CVL-B/C-TQG - SHURE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CVL-B/C-TQG by SHURE.
USER MANUAL CVL-B/C-TQG SHURE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : SHURE
Model : CVL-B/C-TQG
Category : Microphone