503BG - Microphone SHURE - Free user manual and instructions
Find the device manual for free 503BG SHURE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type | Dynamic microphone |
| Polar Pattern | Cardioid |
| Frequency Response | 50 - 15,000 Hz |
| Impedance | 150 ohms |
| Connector | 3-pin XLR (male) |
| Dimensions (L x Dia) | 185 mm x 51 mm |
| Weight | 330 g |
| Output Level | -57 dBV/Pa (1.6 mV) |
| Hum Pickup | Less than 10 mV/mA at 60 Hz |
| Switch | No on/off switch |
| Recommended Application | Vocals, speech, instrument miking |
| Cleaning | Wipe with a damp cloth; do not immerse |
| Storage Temperature | -20°C to 70°C |
| Operating Temperature | -10°C to 60°C |
| Warranty | 2 years (subject to terms) |
Frequently Asked Questions - 503BG SHURE
How do I connect the Shure 503BG microphone?
Connect the 3-pin XLR cable to the microphone. Plug the other end into a mixer or audio interface with an XLR input. Ensure phantom power is off if not required.
What is the polar pattern of the 503BG?
The Shure 503BG has a cardioid polar pattern, which picks up sound from the front and rejects noise from the sides and rear.
Can I use this microphone for vocals?
Yes, the 503BG is designed for vocals and speech. Its cardioid pattern helps isolate the voice from background noise.
How do I clean the Shure 503BG?
Wipe the exterior with a damp cloth. Do not use solvents or immerse the microphone in water. The grille can be unscrewed for deeper cleaning if necessary.
Does the 503BG require phantom power?
No, the 503BG is a dynamic microphone and does not require phantom power. It works with standard XLR inputs.
What is the frequency response of the 503BG?
The frequency response is 50 Hz to 15,000 Hz, suitable for vocals and instruments.
Can I use the 503BG on a guitar amp?
Yes, it works well for miking guitar cabinets. Place the microphone close to the speaker grille for best results.
Is the 503BG compatible with wireless systems?
No, the 503BG is a wired microphone with an XLR connection. Use a wireless transmitter if needed, but it requires adapters.
How do I replace the grille on the 503BG?
Unscrew the grille counterclockwise. Clean or replace it, then screw it back on clockwise. Ensure it is tight.
What accessories are available for the 503BG?
Accessories include a microphone stand adapter, foam windscreen, and replacement grilles. Contact Shure for genuine parts.
User questions about 503BG SHURE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Microphone in PDF format for free! Find your manual 503BG - SHURE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 503BG by SHURE.
USER MANUAL 503BG SHURE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : SHURE
Model : 503BG
Category : Microphone