SR-JK11H - Car radio Stinger - Free user manual and instructions
Find the device manual for free SR-JK11H Stinger in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Car Radio |
| Brand | Stinger |
| Model | SR-JK11H |
| Dimensions (W x H x D) | 178 mm x 50 mm x 160 mm (1 DIN) |
| Weight | 1.0 kg |
| Power Supply | 12V DC (negative ground) |
| Radio Tuner | AM/FM with RDS |
| USB Playback | Yes (USB 2.0) |
| AUX Input | 3.5 mm front panel |
| Bluetooth | Version 4.2, hands-free calling and audio streaming |
| Remote Control | Included (IR) |
| Display | LCD with adjustable backlight |
| Audio Amplifier | 4 x 45W max |
| Equalizer | Built-in (presets and custom) |
| Steering Wheel Control Compatible | Yes (requires adapter) |
| Operating Temperature | -10°C to +60°C |
| Maintenance | Clean with soft dry cloth; avoid liquids |
| Installation | DIN slot mount, disconnect battery before installation |
| Spare Parts Availability | Contact Stinger support or authorized dealers |
| Warranty | 1 year (verify with seller) |
Frequently Asked Questions - SR-JK11H Stinger
How do I install the Stinger SR-JK11H car radio?
Disconnect the vehicle's battery. Remove the old radio. Connect the wiring harness using the color-coded wires (match car wires). Slide the radio into the DIN slot and secure with spring clips. Reconnect battery and test.
How do I set the clock on the SR-JK11H?
Press and hold the CLK button or DISP button (depending on firmware) until time starts flashing. Rotate the volume knob or press UP/DOWN to set hours and minutes. Press the button again to save.
How to pair my phone via Bluetooth?
Enable Bluetooth on your phone. On the radio, press the BT button to enter pairing mode. Search for 'Stinger SR-JK11H' on your phone and select it. If prompted, enter PIN 0000 or 1234. Once paired, audio and calls are streamed.
Why is there no sound from the speakers?
Check that the radio is not muted (MUTE button). Verify speaker wire connections and that impedance is 4-8 ohms. Ensure the radio is not in AUX mode with no device. Also check car audio fuse.
Can I play music from a USB drive?
Yes, insert a USB drive formatted as FAT32 with MP3/WMA files into the front USB port. The radio will recognize it automatically. Use SRC to select USB mode.
How do I reset the radio?
Press and hold the RESET button (typically a small hole on the front panel) using a paperclip for 3 seconds. This restores factory settings.
The radio display is dim. How to adjust brightness?
Press and hold the DISP button repeatedly to cycle through brightness levels. You can also adjust via the system settings menu (press SEL).
What power output does the amplifier provide?
The built-in amplifier delivers 4 x 45 watts maximum (peak). RMS power is typically lower (around 4 x 15-20 watts). Use speakers with compatible power handling.
Is the SR-JK11H compatible with steering wheel controls?
Yes, but requires an external adapter (e.g., PAC SWI-RC). Connect the adapter to the radio's wired remote input (usually a blue wire). Program the adapter following its instructions.
How to clean the radio?
Use a soft, dry microfiber cloth to wipe the front panel. Do not use any liquids, abrasive cleaners, or solvents as they may damage the screen and buttons.
User questions about SR-JK11H Stinger
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Car radio in PDF format for free! Find your manual SR-JK11H - Stinger and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SR-JK11H by Stinger.
USER MANUAL SR-JK11H Stinger
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Stinger
Model : SR-JK11H
Category : Car radio