SWR 1166 A1 - Router SILVERCREST - Free user manual and instructions
Find the device manual for free SWR 1166 A1 SILVERCREST in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | WiFi Router |
| Brand | SilverCrest |
| Model | SWR 1166 A1 |
| Dimensions (W x D x H) | Approx. 200 x 150 x 30 mm |
| Weight | Approx. 300 g |
| Power Supply | 12 V / 1 A AC/DC adapter |
| WiFi Standard | IEEE 802.11 b/g/n, up to 300 Mbit/s |
| Frequency Bands | 2.4 GHz |
| LAN Ports | 4 Ethernet ports 10/100 Mbit/s |
| WAN Port | 1 Ethernet port 10/100 Mbit/s |
| Antennas | 2 fixed external antennas |
| Wireless Security | WEP, WPA, WPA2 |
| Supported Protocols | DHCP, NAT, PPPoE, PPTP |
| Advanced Features | Parental control, firewall, QoS |
| Operating Temperature | 0 °C to 40 °C |
| Operating Humidity | 10% to 85% RH |
| Display | LED indicators: Power, WLAN, LAN, Internet |
| Care and Cleaning | Unplug the device before cleaning. Use a soft, dry cloth. Do not use abrasive products. |
| Safety | Use only the supplied adapter. Place in a well-ventilated area, away from moisture. |
| Spare Parts and Repairability | No user-serviceable parts. Contact authorized support in case of failure. |
| General Information | SilverCrest SWR 1166 A1 router. Designed for home use. Standby consumption: < 5 W. |
Frequently Asked Questions - SWR 1166 A1 SILVERCREST
How to configure the SilverCrest SWR 1166 A1 router for the first time?
Plug in the AC adapter and connect the modem Ethernet cable to the WAN port (different color). Turn on the router, connect to the default WiFi network (name and password on the label) or via an Ethernet cable to a LAN port. Open a browser and enter the router's IP address (usually 192.168.0.1 or 192.168.1.1). Follow the setup wizard to set your network name (SSID) and WiFi password.
What to do if I forgot the router's administrator password?
You can reset the router to factory settings. Press and hold the Reset button (located on the back) for about 10 seconds with a paperclip, until the LEDs flash. All settings will be erased, including the password. You can then log in with the default credentials (admin/admin or admin/password, see the label).
How to improve WiFi range?
Place the router in a central, elevated, and open location, away from thick walls and electronic devices. Avoid interference (microwaves, cordless phones). You can also adjust the antenna orientation. If necessary, install a WiFi repeater or use a mesh network.
What are the LED indicators and what do they mean?
The router has LED indicators: Power (solid green = powered on), WLAN (solid green = WiFi enabled, blinking = activity), LAN 1-4 (solid green = Ethernet connection established, blinking = data transfer), Internet (solid green = active Internet connection, orange = problem). See the manual for details.
How to change the WiFi network name (SSID)?
Log in to the router's administration interface via a browser. Go to the Wireless or WiFi section. Modify the Network Name (SSID) field and save. The router will restart the wireless network; you will need to reconnect your devices with the new name.
The router gets very hot, is this normal?
Some heat is normal, but if excessive, check that the ventilation slots are not blocked and that the router is placed in a ventilated area. Avoid placing it on soft surfaces (carpet, bed). If overheating persists, unplug it and contact support.
How to update the router's firmware?
Log in to the administration interface, go to System Tools or Firmware Update. Check the current version. Visit the manufacturer's website to download the latest version (if available). Upload the file via the interface and follow the instructions. Note: Do not cut power during the update.
How to secure my WiFi network?
In the wireless settings, select the security mode WPA2-AES (or WPA3 if available). Set a strong password (at least 8 characters, mix of letters, numbers, and symbols). Disable WPS if not used. Enable MAC filtering if desired.
What to do if I cannot access the administration interface?
Check that your device is connected to the router (via Ethernet or WiFi). The default IP address is often 192.168.0.1 or 192.168.1.1 (see label). If you changed the address, reset the router. Try another browser or clear the cache. Ensure your device receives an IP from the router (DHCP enabled).
How to restart the router in case of connection issues?
Unplug the AC adapter, wait 30 seconds, then plug it back in. The router restarts. If problems persist, perform a factory reset (Reset button). To avoid interruptions, you can schedule an automatic restart via the interface (if available).
User questions about SWR 1166 A1 SILVERCREST
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Router in PDF format for free! Find your manual SWR 1166 A1 - SILVERCREST and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SWR 1166 A1 by SILVERCREST.
USER MANUAL SWR 1166 A1 SILVERCREST
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : SILVERCREST
Model : SWR 1166 A1
Category : Router