GHWW083WB1 - Air Conditioning FRIGIDAIRE - Free user manual and instructions
Find the device manual for free GHWW083WB1 FRIGIDAIRE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Window Air Conditioner |
| Cooling Capacity (BTU) | 8,000 |
| Recommended Room Size | Up to 350 sq ft |
| Dimensions (W x H x D) | 20 x 12 x 15 inches |
| Weight | 60 lbs |
| Voltage / Frequency | 115 V / 60 Hz |
| Amps | 7.5 |
| Energy Efficiency Ratio (EER) | 12.0 |
| Control Type | Electronic with Remote Control |
| Modes | Cool, Fan, Energy Saver |
| Fan Speeds | 3 (High, Medium, Low) |
| Thermostat | Adjustable with Auto-Restart |
| Air Filter | Washable, Slide-Out |
| Installation | Window Kit Included |
| Maintenance | Clean filter monthly; coil cleaning annually |
| Safety Features | Anti-Theft Screw, Overload Protection |
| Refrigerant | R-410A |
| Noise Level | 52 dB (approx.) |
| Spare Parts Available | Remote, Filter, Window Kit |
| Repairability | Serviceable by certified technician |
Frequently Asked Questions - GHWW083WB1 FRIGIDAIRE
How do I install the Frigidaire GHWW083WB1 air conditioner?
Installation requires a window opening between 23-36 inches wide. Use the included window kit: attach side panels, lift unit into window, lower window sash onto unit, and secure with mounting screws. Ensure the unit is slightly tilted downward for proper drainage.
What is the recommended room size for this air conditioner?
The Frigidaire GHWW083WB1 is designed for rooms up to 350 square feet. For best cooling, ensure the room is well-insulated and close windows/doors.
How do I clean the air filter?
Turn off and unplug the unit. Slide out the filter from the front grille. Wash it with warm water and mild detergent, then let it dry completely before reinstalling. Clean every 30 days for optimal performance.
What does the Energy Saver mode do?
In Energy Saver mode, the fan stops when the compressor turns off, cycling on occasionally to monitor room temperature. This saves electricity while maintaining comfort.
How can I reset the air conditioner?
If the unit stops unexpectedly, unplug it for 5-10 minutes. Press the Reset button on the plug (if available) or simply plug it back in. This restores factory defaults.
Why is my air conditioner not cooling?
Check if the filter is dirty, the thermostat is set correctly, or the room is too large. Also ensure the window unit is not blocked by curtains or furniture. If problem persists, contact a technician.
Can I use an extension cord?
No, use a dedicated 115V outlet. Extension cords can cause voltage drop and fire risk. If needed, use a heavy-duty cord with a 15-amp rating, but it's not recommended.
How do I use the remote control?
Insert two AAA batteries (not included). Point the remote at the unit's receiver. Use buttons for power, mode, fan speed, and temperature. The remote has a range of about 20 feet.
What is the noise level?
The noise level is approximately 52 dB, similar to a quiet conversation. It may vary based on fan speed and room acoustics.
How do I save energy while using this air conditioner?
Use Energy Saver mode, set thermostat to 78°F (26°C), close curtains during peak sun, and clean the filter regularly. Proper insulation helps reduce cooling load.
User questions about GHWW083WB1 FRIGIDAIRE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air Conditioning in PDF format for free! Find your manual GHWW083WB1 - FRIGIDAIRE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. GHWW083WB1 by FRIGIDAIRE.
USER MANUAL GHWW083WB1 FRIGIDAIRE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : FRIGIDAIRE
Model : GHWW083WB1
Category : Air Conditioning