GWB-12NP - Water heater Infiniton - Free user manual and instructions
Find the device manual for free GWB-12NP Infiniton in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of product | Gas water heater |
| Brand | Infiniton |
| Model | GWB-12NP |
| Capacity | 12 liters |
| Energy source | Natural gas / LPG |
| Power consumption | Approx. 24 kW (heating) |
| Gas type | Natural gas (G20) or LPG (G30/G31) with conversion kit |
| Ignition | Electronic ignition (battery powered) |
| Flue type | Balanced flue (room-sealed) |
| Dimensions (H x W x D) | Approx. 580 x 340 x 240 mm |
| Weight (net) | Approx. 12 kg |
| Water connection | G 1/2 inch (inlet and outlet) |
| Minimum water pressure | 0.1 bar |
| Maximum water pressure | 8 bar |
| Temperature control | Thermostatic control (30-60 °C) |
| Safety features | Flame failure device, overheat protection, anti-freeze protection |
| Installation type | Wall mounted (indoor) |
| Maintenance | Annual inspection by qualified technician; clean water filter and burner |
| Spare parts | Thermocouple, gas valve, burner assembly, water valve, control board |
| Repairability | Modular design; parts available from authorized service centers |
| Certifications | CE, EU Gas Appliance Regulation 2016/426 |
| Included accessories | Installation template, gas conversion kit (if applicable), user manual |
Frequently Asked Questions - GWB-12NP Infiniton
How do I adjust the water temperature on the Infiniton GWB-12NP?
Turn the temperature control dial on the front panel. The temperature range is typically 30-60 °C. Set to your desired level; the thermostatic valve will maintain it.
What type of gas can the GWB-12NP use?
It is factory-set for natural gas (G20). For LPG (G30/G31), use the included conversion kit and follow the manual instructions. Always consult a qualified gas installer.
Why does the water heater not ignite?
Check the gas supply is on and the battery for electronic ignition is installed correctly. Ensure the water flow is sufficient (minimum 0.1 bar). If the problem persists, the flame failure device may have tripped; reset by turning off and on.
How often should I clean the water heater?
It is recommended to clean the water filter every 6 months and have the burner and heat exchanger inspected annually by a professional.
Can I install the water heater myself?
No. Installation must be carried out by a certified gas installer in accordance with local regulations. Improper installation could lead to gas leaks or carbon monoxide poisoning.
What does the error code E1 mean?
E1 indicates a flame failure. This means the appliance detected no flame after ignition. Check gas supply, ignition electrode, and thermocouple. If the problem continues, contact customer service.
Is the water heater suitable for outdoor installation?
No, the GWB-12NP is designed for indoor installation only with a balanced flue to the outside. It must be protected from rain and frost.
How do I drain the water heater for winter storage?
Turn off gas and water supply. Open a hot water tap, then remove the drain plug at the bottom of the unit. Allow all water to empty. Reinstall the plug before reuse.
What spare parts are commonly needed for the GWB-12NP?
Common spare parts include thermocouple, gas valve, ignition electrode, and water flow sensor. These are available from authorized service centers.
Does the water heater have a warranty?
Yes, Infiniton provides a 2-year warranty for manufacturing defects. Registration may be required. Keep your purchase receipt and contact customer support for claims.
User questions about GWB-12NP Infiniton
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Water heater in PDF format for free! Find your manual GWB-12NP - Infiniton and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. GWB-12NP by Infiniton.