ID-1196N - Ice machine Manitowoc - Free user manual and instructions
Find the device manual for free ID-1196N Manitowoc in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Modular Ice Machine |
| Model | ID-1196N |
| Brand | Manitowoc |
| Ice Production Capacity (lbs/day) | 1196 |
| Ice Type | Dice-shaped cubelet |
| Dimensions (W x D x H) | 30 x 28 x 44 inches (approx.) |
| Weight (net) | 250 lbs (approx.) |
| Power Supply | 208-230 V, 1 Ph, 60 Hz |
| Current Draw | 10 A (approx.) |
| Refrigerant Type | R-404A or R-134a |
| Condenser Type | Air-cooled (standard) or water-cooled (optional) |
| Water Connection | 3/8 inch female flare |
| Drain Connection | 3/4 inch female pipe thread (FPT) |
| Control System | Manitowoc Intuitive Control |
| Self-Cleaning Function | Yes, with AquaClean cycle |
| Energy Efficiency | ENERGY STAR certified (model-dependent) |
| Sanitary Design | NSF/ANSI Standard 12 compliant |
| Air Filter Cleaning | Monthly (recommended) |
| Water Filter Replacement | Every 6 months (recommended) |
| Repairable Components | Water pump, evaporator, fan motor, control board |
Frequently Asked Questions - ID-1196N Manitowoc
What is the daily ice production capacity of the Manitowoc ID-1196N?
The Manitowoc ID-1196N produces up to 1,196 lbs of ice per day under standard conditions.
What type of ice does the ID-1196N make?
It produces dice-shaped cubelet ice, which is common for commercial use.
What are the dimensions of the ID-1196N?
Approximate dimensions are 30 inches wide, 28 inches deep, and 44 inches high. Always verify with the manual for exact measurements.
How do I clean the Manitowoc ID-1196N ice machine?
Use the AquaClean self-cleaning cycle or manually clean with an approved sanitizer. Follow the instructions in the manual for detailed steps.
What electrical specifications are required for the ID-1196N?
It requires a 208-230 Volt, 1 Phase, 60 Hz power supply. The circuit should be dedicated, with a minimum of 15 amps.
Can the ID-1196N be installed indoors?
Yes, it can be installed indoors with adequate ventilation. Ensure the ambient temperature does not exceed the limits specified in the manual.
How often should I replace the water filter?
Replace the water filter every 6 months to maintain ice quality and prevent scale buildup.
What does the error code 'E1' indicate?
Error code E1 typically indicates a water level sensor failure. Check the water supply and sensor connections. Consult the manual for troubleshooting.
Is the Manitowoc ID-1196N ENERGY STAR certified?
Many models in the ID series are ENERGY STAR certified. Check the specific unit's label or manual to confirm.
Where can I find replacement parts for the ID-1196N?
Replacement parts such as the water pump, evaporator, and fan motor can be ordered through Manitowoc authorized dealers or the manufacturer's website.
User questions about ID-1196N Manitowoc
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Ice machine in PDF format for free! Find your manual ID-1196N - Manitowoc and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ID-1196N by Manitowoc.
USER MANUAL ID-1196N Manitowoc
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Manitowoc
Model : ID-1196N
Category : Ice machine