PowerEdge T710 - Server DELL - Free user manual and instructions
Find the device manual for free PowerEdge T710 DELL in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Server |
| Brand | Dell |
| Model | PowerEdge T710 |
| Form Factor | Tower (5U) |
| Processor | Up to two Intel Xeon 5500/5600 series |
| Memory | Up to 144 GB (18 DIMM slots, DDR3) |
| Storage | Up to 8 hot-swap 3.5" SAS/SATA or 16 2.5" drives |
| RAID Support | PERC H200/H700/H800 (optional) |
| Expansion Slots | 7 PCIe (5 x8, 2 x4) |
| Network | Dual Broadcom 5709 Gigabit Ethernet |
| Power Supply | Dual 870W or 1100W hot-swap redundant |
| Cooling | 6 hot-swap fans |
| Management | iDRAC6 Enterprise (optional) |
| Dimensions (H x W x D) | 43.7 x 21.8 x 69.6 cm (17.2 x 8.6 x 27.4 in) |
| Weight | Max 43.5 kg (95.9 lb) |
| Operating System Support | Windows Server, Red Hat, SUSE, VMware ESX |
| Security | Chassis intrusion detection, TPM 1.2 |
| Chassis Type | Tower (convertible to rack) |
| Warranty | Standard 1 year, extendable |
| Maintenance | Hot-swap components, tool-less access |
Frequently Asked Questions - PowerEdge T710 DELL
How to reset the iDRAC password?
Press and hold the i button on the front panel for 5 seconds to reset to defaults, or use the racadm command.
What is the maximum RAM supported?
Up to 144 GB using 18 registered DDR3 DIMMs (8 GB each).
How to add a second processor?
Install the CPU in the second socket (CPU2) with heatsink and ensure matched memory population per Dell guidelines.
Can I use SATA drives in SAS backplane?
Yes, the backplane supports both SAS and SATA drives, but mixing may affect performance and RAID support.
How to replace a failed hard drive?
Identify drive via LED, press release button, pull tray, insert new drive, and rebuild automatically if RAID configured.
How to update BIOS?
Download the latest BIOS executable from Dell support, run in Windows or use DOS bootable USB.
What is the power consumption?
Typical 250-450W depending on configuration; max 1100W with dual power supplies.
How to access the system logs?
Via iDRAC web interface under System Logs, or using OpenManage Server Administrator.
Is the T710 rack-mountable?
Yes, it can be converted to rack mount using optional Rack Conversion Kit.
How to troubleshoot boot failure?
Check POST codes via front LCD, reseat RAM and cards, test with minimal hardware, and review System Event Log.
User questions about PowerEdge T710 DELL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Server in PDF format for free! Find your manual PowerEdge T710 - DELL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PowerEdge T710 by DELL.