COMPACT M 12 - Loudspeaker RCF - Free user manual and instructions
Find the device manual for free COMPACT M 12 RCF in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Passive 2-way loudspeaker |
| Woofer Size | 12 inches |
| Tweeter Type | 1-inch compression driver |
| Power Handling (RMS) | 400 W |
| Power Handling (Peak) | 1600 W |
| Impedance | 8 ohms |
| Frequency Response | 55 Hz – 20 kHz |
| Sensitivity (1W/1m) | 97 dB |
| Maximum SPL | 129 dB |
| Enclosure Material | Plywood with black paint |
| Dimensions (W x H x D) | 600 x 380 x 340 mm |
| Weight | 18 kg |
| Input Connectors | 2 x Neutrik Speakon NL4 |
| Rigging Points | 10 x M10 threaded points |
| Pole Mount | 35 mm socket |
| Grille | Steel with acoustically transparent foam |
| Maintenance | Wipe with dry cloth; avoid solvents |
| Safety | Use with stable stands; ensure proper ventilation |
| Spare Parts Availability | Contact RCF authorized service centers |
| Warranty | 6 years (EU) or as per local regulations |
Frequently Asked Questions - COMPACT M 12 RCF
What amplifier power is recommended for the RCF COMPACT M 12?
An amplifier delivering between 400 W and 800 W RMS at 8 ohms per speaker is recommended. Ensure the amplifier can handle a 4 ohm load if running multiple speakers in parallel.
How do I connect the COMPACT M 12 to an amplifier?
Use a Speakon NL4 cable. The speaker has two NL4 connectors for daisy-chaining. Wire pin 1+ and 1- for positive and negative. Ensure the amplifier output matches the speaker impedance.
Can I use the COMPACT M 12 as a floor monitor?
Yes, the speaker can be used as a wedge monitor. Place it on its side with the logo facing the performer. Use the pole mount on the side if needed.
What is the maximum SPL of this speaker?
The maximum SPL is 129 dB (peak) at 1 meter. This is achieved with the recommended amplifier power.
How should I clean and maintain the COMPACT M 12?
Wipe the enclosure with a dry or slightly damp cloth. Do not use abrasive cleaners or solvents. Check grille for dust and clean with a soft brush. Inspect cables and connectors regularly.
What type of stand is suitable for this speaker?
Use a sturdy speaker stand with a 35 mm pole. The stand must be rated for speakers weighing at least 18 kg (40 lbs). Ensure the stand legs are fully extended and locked.
Is the COMPACT M 12 suitable for outdoor use?
While the speaker is built with a plywood enclosure and painted finish, it is not weatherproof. Protect from rain and direct sunlight. Use a cover when not in use.
Can I bi-amp or tri-amp this speaker?
No, the COMPACT M 12 is a passive speaker with an internal crossover. It requires a single amplifier channel. Bi-amping is not supported.
What is the coverage angle?
The speaker features a constant directivity horn with a coverage of 90° x 60° (horizontal x vertical). Rotatable for vertical or horizontal use.
Does RCF provide spare parts for this model?
Yes, replacement parts such as woofers, compression drivers, and grilles are available through RCF authorized service centers. Contact RCF support for ordering.
User questions about COMPACT M 12 RCF
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual COMPACT M 12 - RCF and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. COMPACT M 12 by RCF.
USER MANUAL COMPACT M 12 RCF
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : RCF
Model : COMPACT M 12
Category : Loudspeaker