Live-8E - NAS AIRLIVE - Free user manual and instructions
Find the device manual for free Live-8E AIRLIVE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Network Attached Storage (NAS) |
| Drive Bays | 8x 3.5" SATA III (hot-swappable) |
| Processor | Intel Celeron J4125 quad-core 2.0 GHz |
| Memory | 4 GB DDR4 (expandable to 8 GB) |
| Network Interface | 2x Gigabit Ethernet (RJ-45) |
| USB Ports | 2x USB 3.0, 1x USB 2.0 |
| RAID Support | JBOD, RAID 0, 1, 5, 6, 10 |
| File System | EXT4, Btrfs, NTFS (read/write via SMB) |
| Protocols | SMB/CIFS, NFS, AFP, FTP, WebDAV |
| Dimensions (W x D x H) | 430 x 300 x 250 mm |
| Weight | 8.5 kg (without drives) |
| Power Supply | 100-240 V AC, 50/60 Hz, 250W external adapter |
| Power Consumption | 45 W (idle), 75 W (active) |
| Operating Temperature | 0°C to 40°C |
| Noise Level | 22 dB(A) (idle) |
| Main Functions | File sharing, backup, media streaming, cloud sync, surveillance |
| Maintenance | Periodic dust cleaning, firmware updates, drive health monitoring |
| Safety | Overcurrent protection, surge suppression, Kensington lock slot |
| Spare Parts / Repairability | Replaceable fan, PSU, and RAM modules; user-replaceable drives |
| Warranty | 2 years limited hardware warranty |
Frequently Asked Questions - Live-8E AIRLIVE
How do I access the NAS from my computer?
Connect the NAS to your network via Ethernet, then use a browser to access the web interface at the IP address assigned by DHCP. Alternatively, use the AirLive NAS Finder utility to discover the device.
What RAID levels are supported?
The Live-8E supports JBOD, RAID 0, 1, 5, 6, and 10. RAID 5 and 6 provide a balance of performance and redundancy. You can configure RAID during initial setup via the web interface.
Can I expand storage later?
Yes, you can add or replace drives hot-swappably. Some RAID configurations allow online expansion (e.g., add a drive to RAID 5) but check the system. It is recommended to back up data before changing RAID.
How do I update the firmware?
Download the latest firmware from the AirLive website. Log into the NAS web interface, go to System > Firmware Update, select the file, and apply. Do not power off during update.
What is the default login?
The default username is admin and password is admin (or blank). Change these immediately after first login for security.
Can I access my files remotely?
Yes, enable Cloud Service or set up DDNS and port forwarding. The NAS also supports VPN server for secure remote access.
How do I replace a failed hard drive?
If using a redundant RAID (e.g., RAID 5), remove the failed drive, insert a new one (same or larger capacity), and rebuild via the web interface. Hot-swap is supported; no need to power down.
What backups are supported?
The NAS supports local backup to USB drives, remote backup to another NAS, and cloud backup (e.g., Google Drive, Dropbox) via pre-installed apps.
Can I use the NAS as a media server?
Yes, the NAS includes DLNA and Plex Media Server compatibility. Upload movies/music to the Media share and stream to smart TVs, consoles, or mobile devices.
How do I reset the device to factory settings?
Press and hold the Reset button on the rear panel for 10 seconds using a paperclip. The system will reboot and restore defaults. Note: all data remains, but settings are cleared.
User questions about Live-8E AIRLIVE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your NAS in PDF format for free! Find your manual Live-8E - AIRLIVE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Live-8E by AIRLIVE.
USER MANUAL Live-8E AIRLIVE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : AIRLIVE
Model : Live-8E
Category : NAS