YR140-AP-161 - Ice machine Atosa - Free user manual and instructions
Find the device manual for free YR140-AP-161 Atosa in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Ice Machine |
| Brand | Atosa |
| Model | YR140-AP-161 |
| Ice Production Capacity | Up to 140 lbs per day |
| Ice Storage Capacity | 50 lbs |
| Ice Type | Crescent or cube (depending on model) |
| Dimensions (W x D x H) | 22 x 16 x 26 inches |
| Weight | 80 lbs |
| Power Supply | 120V / 60Hz / 5A |
| Refrigerant | R290 (Environmentally friendly) |
| Self-Cleaning Function | Yes, with automatic cleaning cycle |
| Water Connection | 1/4" flare fitting (inlet) |
| Drain Connection | 1/2" garden hose (outlet) |
| Operating Temperature Range | 50°F - 100°F (10°C - 38°C) |
| Insulation Type | High-density polyurethane foam |
| Condenser Type | Air-cooled |
| Compressor | Hermetically sealed, 1/3 HP |
| Warranty | 2 years parts and labor, 5 years compressor |
| Certifications | NSF, UL, CE |
| Recommended Cleaning Frequency | Every 3 months |
| Noise Level | < 55 dB |
| Ice Scoop Included | Yes, polycarbonate |
| Water Filter Included | Optional (sold separately) |
Frequently Asked Questions - YR140-AP-161 Atosa
How do I start the ice machine for the first time?
Ensure the water supply is connected and the drain line is properly placed. Plug in the unit, press the ON/OFF button, and wait for the water reservoir to fill. The first batch may be small.
Why is my ice machine not producing ice?
Check if the water supply is on and the water filter is clean. Ensure the ambient temperature is within 50°F-100°F. Also, verify that the ice bin full sensor is not activated.
How often should I clean the ice machine?
Atosa recommends cleaning every 3 months using a suitable ice machine cleaner. Scale buildup reduces efficiency. Follow the manual for the self-cleaning cycle.
What type of water is recommended?
Use filtered or potable water to minimize mineral deposits. Hard water may require a separate water softener or frequent cleaning.
How do I adjust the ice thickness?
Locate the thickness adjustment screw inside the control panel (consult manual). Turn clockwise for thicker ice, counterclockwise for thinner. Allow 24 hours to see changes.
What should I do if the ice tastes bad?
Clean the machine thoroughly, replace the water filter if used, and flush the water line. Avoid storing food near the unit.
Can I install this ice machine outdoors?
This model is rated for indoor use only. Exposure to rain, direct sunlight, or extreme temperatures can damage it and void the warranty.
How do I replace the ice bin or parts?
Contact Atosa customer service or an authorized dealer for genuine replacement parts. Do not use third-party parts as they may affect performance.
What does the error code 'E1' mean?
E1 indicates a water supply issue. Check that the water valve is open, the line is not kinked, and the water pressure is between 20-80 psi.
How do I winterize the ice machine?
Unplug the unit, drain all water from the reservoir and lines using the drain plug, and dry the interior. Store in a temperature-controlled location above freezing.
User questions about YR140-AP-161 Atosa
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Ice machine in PDF format for free! Find your manual YR140-AP-161 - Atosa and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. YR140-AP-161 by Atosa.
USER MANUAL YR140-AP-161 Atosa
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Atosa
Model : YR140-AP-161
Category : Ice machine