YR450S-AP-161 - Ice Maker Atosa - Free user manual and instructions
Find the device manual for free YR450S-AP-161 Atosa in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Ice Maker |
| Brand | Atosa |
| Model | YR450S-AP-161 |
| Ice Production Capacity | 450 lbs (204 kg) per 24 hours |
| Ice Type | Full cube |
| Storage Bin Capacity | 150 lbs (68 kg) |
| Condenser Type | Air-cooled |
| Refrigerant | R-404A |
| Electrical Requirements | 115V / 60Hz, 15A |
| Dimensions (W x D x H) | 30 x 28 x 36 inches (76 x 71 x 91 cm) |
| Net Weight | 200 lbs (91 kg) |
| Self-Cleaning Cycle | Yes, with automatic descaling |
| Bin Full Sensor | Yes, automatically shuts off |
| Adjustable Ice Thickness | Yes |
| Water Filter | Required (external, not included) |
| Maintenance | Weekly cleaning of condenser fins; quarterly descaling; replace water filter every 6 months |
| Warranty | 3 years parts and labor |
Frequently Asked Questions - YR450S-AP-161 Atosa
How do I clean my Atosa YR450S-AP-161 ice maker?
Use the self-cleaning cycle with a recommended descaling solution. Alternatively, manually clean the interior with a mild detergent and rinse thoroughly. Clean the condenser fins monthly.
What does error code E1 mean?
Error code E1 indicates a water supply issue. Check that the water line is connected and the valve is open. Also inspect the water filter for clogs.
How long does it take to produce the first batch of ice?
Approximately 15-20 minutes for the first cycle, depending on ambient temperature and water temperature.
Can I install this ice maker outdoors?
No, it is designed for indoor use only. Operating outdoors can void the warranty and cause performance issues.
What type of water filter should I use?
Use a standard 1/4-inch inline water filter rated for commercial ice machines. Replace every 6 months.
Why is my ice maker not producing ice?
Check that the unit is powered on, the water supply is connected, and the bin is not full. Also verify that the condenser is clean and the ambient temperature is within 50-100°F.
How do I adjust the ice thickness?
Locate the adjustment screw on the control board (refer to manual). Turn clockwise for thinner ice and counterclockwise for thicker ice. Make small adjustments and wait for 2-3 cycles to see the result.
What refrigerant does the YR450S-AP-161 use?
It uses R-404A refrigerant. Do not attempt to recharge yourself; call a certified technician.
How often should I descale the ice maker?
Descale every 3 months or when you notice a decrease in ice production. Use a commercial ice machine descaler.
Where can I find replacement parts?
Contact Atosa customer service or an authorized dealer. Common parts include water pumps, evaporator plates, and fan motors.
User questions about YR450S-AP-161 Atosa
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Ice Maker in PDF format for free! Find your manual YR450S-AP-161 - Atosa and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. YR450S-AP-161 by Atosa.
USER MANUAL YR450S-AP-161 Atosa
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Atosa
Model : YR450S-AP-161
Category : Ice Maker