BRC90SS - Range hood BAUMATIC - Free user manual and instructions
Find the device manual for free BRC90SS BAUMATIC in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Range Hood |
| Brand | Baumatic |
| Model | BRC90SS |
| Width | 90 cm |
| Installation Type | Chimney / Wall-mounted |
| Finish | Stainless Steel |
| Extraction Rate (Max) | 650 m³/h |
| Noise Level (Max) | 65 dB(A) |
| Number of Speeds | 3 |
| Control Type | Electronic push buttons |
| Lighting | 2 x 20W halogen (replaceable) |
| Filter Type | Aluminum grease filter (washable) |
| Ducted / Recirculation | Ducted (optional recirculation with charcoal filter) |
| Power Consumption | 250 W |
| Voltage / Frequency | 220-240 V / 50 Hz |
| Weight | Approx. 15 kg |
| Dimensions (H x W x D) | 60-110 cm (adjustable) x 90 cm x 50 cm |
| Energy Efficiency Class | B |
| Warranty | 2 years |
Frequently Asked Questions - BRC90SS BAUMATIC
How do I install the Baumatic BRC90SS range hood?
Installation should be performed by a qualified professional. The hood must be mounted at a minimum height of 65 cm above an electric hob or 75 cm above a gas hob. Ensure the chimney is properly fixed to the wall and the ducting is connected securely.
How often should I clean the grease filters?
The aluminum grease filters should be cleaned every 4-6 weeks depending on usage. They can be washed by hand with warm soapy water or in a dishwasher at low temperature. Allow them to dry completely before reinstalling.
Can I use the hood in recirculation mode?
Yes, you can use it in recirculation mode by installing optional charcoal filters. These filters absorb odors and need to be replaced every 4-6 months. Recirculation ducting kits are available separately.
How do I replace the light bulbs?
Turn off power to the hood. Remove the lamp cover by gently prying it open. Replace the halogen bulb (20W, G4 base) with a new one of the same type. Avoid touching the bulb with bare fingers; use a cloth or gloves.
What should I do if the hood is not extracting properly?
Check that the grease filters are clean and not blocked. Ensure the ducting is not obstructed or too long. If using recirculation, replace the charcoal filters. Also verify that the speed setting is adequate.
Is the control panel easy to operate?
The control panel features push buttons for fan speed (low, medium, high) and light on/off. Some models may have a timer function. The buttons are clearly labeled for ease of use.
What is the recommended duct diameter?
For optimal performance, use a duct with a diameter of 150 mm (6 inches). If using a flexible duct, ensure it is stretched smoothly to minimize air resistance.
Can I install the hood above an island?
The BRC90SS is designed for wall installation. For island installation, a separate island kit or a different model may be required. Consult the manual or a professional.
How do I reset the filter saturation indicator?
After cleaning or replacing filters, press and hold the speed button (or a designated reset button) for about 3 seconds until the indicator light goes off. Refer to the manual for exact steps.
Where can I find spare parts for my Baumatic BRC90SS?
Spare parts such as filters, bulbs, and motors can be ordered from Baumatic authorized dealers or online parts retailers. Always quote the model number BRC90SS when ordering.
User questions about BRC90SS BAUMATIC
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual BRC90SS - BAUMATIC and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BRC90SS by BAUMATIC.
USER MANUAL BRC90SS BAUMATIC
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : BAUMATIC
Model : BRC90SS
Category : Range hood