PS568A-R2 - Extension Black Box - Free user manual and instructions
Find the device manual for free PS568A-R2 Black Box in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Network Extender |
| Model | PS568A-R2 |
| Brand | Black Box |
| Dimensions (W x D x H) | 4.5 x 2.3 x 1.1 in (11.4 x 5.8 x 2.8 cm) |
| Weight | 0.5 lb (0.23 kg) |
| Power Input | 5V DC, 1A |
| Power Consumption | 5 W max |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Network Interface | 1 x RJ45 (10/100 Mbps) |
| Wireless Standard | IEEE 802.11b/g/n |
| Frequency Band | 2.4 GHz |
| Maximum Data Rate | 300 Mbps |
| Security | WEP, WPA, WPA2-PSK |
| Reset Button | Yes (pinhole) |
| LED Indicators | Power, Link, Activity |
| Mounting | Desktop or wall-mountable (keyhole slots) |
| Included Accessories | Power adapter, Ethernet cable, quick start guide |
| Warranty | 2 years limited |
| Regulatory Compliance | FCC, CE, RoHS |
Frequently Asked Questions - PS568A-R2 Black Box
How do I set up the PS568A-R2 extender?
Connect the extender to a power outlet and press the WPS button on your router, then press the WPS button on the extender within 2 minutes. Alternatively, use the web interface via a browser at 192.168.1.1.
What is the default IP address of the PS568A-R2?
The default IP address is 192.168.1.1. You can access the setup page by typing this into your browser after connecting to the extender's network (SSID: BlackBox_EXT).
How do I reset the PS568A-R2 to factory defaults?
Use a paperclip to press and hold the Reset pinhole button on the side of the device for about 10 seconds until the LED blinks rapidly. Release and wait for the extender to reboot.
What is the maximum range of the PS568A-R2?
The extender can cover up to 1500 square feet (140 m²) under optimal conditions, depending on obstacles and interference.
Can I use the PS568A-R2 with any router?
Yes, it is compatible with any standard router that supports IEEE 802.11b/g/n and has a WPS button or web-based configuration.
How do I update the firmware on the PS568A-R2?
Log into the web interface (192.168.1.1), go to Administration > Firmware Upgrade, browse for the latest firmware file from the Black Box support site, and click Upgrade.
What do the LED indicators mean?
Power: solid green indicates power on. Link: solid green if connected to router, slow blink if not. Activity: flashing indicates data traffic.
Is the PS568A-R2 wall-mountable?
Yes, the extender has two keyhole slots on the back for wall mounting. Use screws (not included) with appropriate anchors.
Does the PS568A-R2 support Power over Ethernet?
No, the PS568A-R2 requires a 5V DC power adapter (included) and does not support PoE.
What security features does the PS568A-R2 support?
It supports WEP (64/128-bit), WPA, WPA2-PSK (AES/TKIP), and WPA2-Mixed encryption. It is recommended to use WPA2-PSK for best security.
User questions about PS568A-R2 Black Box
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Extension in PDF format for free! Find your manual PS568A-R2 - Black Box and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PS568A-R2 by Black Box.
USER MANUAL PS568A-R2 Black Box
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Black Box
Model : PS568A-R2
Category : Extension