LWE120A-KIT - Access Point Black Box - Free user manual and instructions
Find the device manual for free LWE120A-KIT Black Box in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Access Point |
| Brand | Black Box |
| Model | LWE120A-KIT |
| Dimensions (W x D x H) | 200 x 200 x 40 mm |
| Weight | 0.5 kg |
| Power Supply | PoE (Power over Ethernet) or 12V DC adapter |
| Wireless Standards | IEEE 802.11 a/b/g/n/ac |
| Frequency Bands | 2.4 GHz and 5 GHz |
| Maximum Data Rate | Up to 1200 Mbps |
| Ethernet Ports | 1 x Gigabit Ethernet (PoE in) |
| Security Features | WPA2-PSK, WPA3, MAC address filtering, VLAN support |
| Management | Web interface, SNMP, CLI, cloud management |
| Mounting | Ceiling or wall mount (bracket included) |
| Operating Temperature | 0°C to 40°C |
| Humidity | 10% to 90% non-condensing |
| LED Indicators | Power, LAN, WLAN |
| Antenna | Internal dual-band antennas |
| Package Contents | Access point, mounting bracket, screws, quick start guide |
| Certifications | CE, FCC, RoHS |
| Warranty | 2 years |
Frequently Asked Questions - LWE120A-KIT Black Box
How do I set up the Black Box LWE120A-KIT Access Point?
Connect the access point to your network via an Ethernet cable with PoE or use the included power adapter. Then, configure it using the web interface: open a browser and enter the default IP (check the sticker). Follow the setup wizard to set SSID and password.
What is the default IP address and login credentials?
The default IP address is typically 192.168.1.1 or 192.168.0.1. The default username is admin and password is admin or found on the device label.
Can this access point be mounted on a wall or ceiling?
Yes, the LWE120A-KIT includes a mounting bracket for both wall and ceiling installations. Use the provided screws and anchors to secure it.
Does it support Power over Ethernet (PoE)?
Yes, it supports 802.3af PoE. You can power it through the Ethernet port using a PoE switch or injector.
What wireless security protocols are supported?
The device supports WPA2-PSK, WPA3, and MAC address filtering. For enterprise environments, it also supports RADIUS authentication via WPA-Enterprise.
How do I perform a factory reset?
Locate the reset button on the device. Press and hold it for about 10 seconds until the LED flashes. The device will reboot with factory defaults.
What is the maximum number of concurrent users?
The access point can typically handle 50-100 simultaneous connections depending on traffic and environment. For optimal performance, limit to around 50 clients.
Can I use multiple LWE120A-KIT units for seamless roaming?
Yes, when configured with the same SSID and password, clients can roam between units. For seamless handoff, consider using a controller or cloud management.
How do I update the firmware?
Download the latest firmware from Black Box's support website. Log into the web interface, navigate to Administration > Firmware Upgrade, and upload the file. Do not power off during the update.
What should I do if my device is not powering on?
Check the Ethernet cable connection if using PoE, or ensure the power adapter is plugged in. Verify that the PoE source is active. If the LED still doesn't light, the device may be defective - contact support.
User questions about LWE120A-KIT Black Box
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Access Point in PDF format for free! Find your manual LWE120A-KIT - Black Box and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LWE120A-KIT by Black Box.
USER MANUAL LWE120A-KIT Black Box
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Black Box
Model : LWE120A-KIT
Category : Access Point