APS2448UL - Battery Tripp Lite - Free user manual and instructions
Find the device manual for free APS2448UL Tripp Lite in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Inverter/Charger |
| DC Input Voltage | 48 V DC |
| AC Output Voltage | 120 V AC |
| Continuous Power Output | 2400 W |
| Surge Power Output | 4800 W |
| Output Waveform | Modified Sine Wave |
| Maximum Charging Current | 60 A |
| Transfer Time | 20 ms (typical) |
| Dimensions (H x W x D) | 16.5 x 8.5 x 11 inches |
| Weight | 40 lbs |
| Battery Type | External (not included) |
| Cooling Method | Fan |
| Remote Control Capability | Optional |
| Protections | Overload, Over-Temperature, Short Circuit |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Certifications | UL, cUL, FCC |
Frequently Asked Questions - APS2448UL Tripp Lite
What batteries are compatible with the Tripp Lite APS2448UL?
The APS2448UL requires an external 48V DC battery bank. Deep-cycle lead-acid or AGM batteries are recommended. The inverter can charge at up to 60A, so the battery capacity should be sized accordingly.
Can the APS2448UL power sensitive electronics like computers?
The APS2448UL produces a modified sine wave output. Some sensitive electronics may experience issues. For critical devices, consider using a pure sine wave inverter.
How do I connect the APS2448UL to my battery bank?
Use proper gauge cables (e.g., 2/0 AWG for short runs) with ring terminals. Connect positive and negative to the inverter terminals. Ensure correct polarity and use appropriate fusing.
What is the maximum AC input current for charging?
The APS2448UL can draw up to 12A from a 120V AC source when charging at full current. Use a dedicated 15A or 20A circuit.
How long does it take to charge a 48V battery bank?
Charging time depends on battery capacity and state of discharge. With the 60A charger, a 200Ah battery (at 48V) would take about 3-4 hours from empty, assuming efficient charging.
Can I run the APS2448UL without batteries?
No, the APS2448UL requires a battery bank to operate. It cannot function as a standalone inverter without a DC source.
What does the 'UL' in APS2448UL stand for?
'UL' stands for Underwriters Laboratories, indicating the inverter is certified to meet safety standards. It does not affect operation.
How do I reset the inverter after a fault?
Turn off the inverter, disconnect the AC input, and wait 1 minute. Reconnect and turn on. Check for overload or short circuit. If fault persists, consult the manual.
Can I use the APS2448UL in a vehicle?
Yes, it can be used in RVs, boats, or trucks with a suitable 48V battery system. Ensure proper ventilation and secure mounting.
What is the typical lifespan of the APS2448UL?
With proper use and maintenance, the inverter can last 5-10 years. Battery lifespan depends on type and usage, typically 3-6 years for deep-cycle batteries.
User questions about APS2448UL Tripp Lite
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Battery in PDF format for free! Find your manual APS2448UL - Tripp Lite and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. APS2448UL by Tripp Lite.
USER MANUAL APS2448UL Tripp Lite
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Tripp Lite
Model : APS2448UL
Category : Battery