WHF2420-W - Heating KING - Free user manual and instructions
Find the device manual for free WHF2420-W KING in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Fan Heater |
| Brand | KING |
| Model | WHF2420-W |
| Color | White |
| Heating Element | Ceramic |
| Power Settings | Low (1000W) and High (2000W) |
| Fan Modes | Fan only, Low heat, High heat |
| Thermostat | Adjustable thermostat with auto shut-off |
| Oscillation | Yes, 70° wide oscillation |
| Timer | 1-12 hours timer |
| Remote Control | Yes, included |
| Safety Features | Overheat protection, Tip-over switch, Cool-touch housing |
| Power Supply | 220-240V ~ 50Hz |
| Power Consumption | Max 2000W |
| Dimensions (W x D x H) | 25.0 x 20.0 x 30.0 cm |
| Weight | 2.1 kg |
| Cord Length | 1.5 meters |
| Noise Level | < 45 dB |
| Energy Class | A |
| Maintenance | Clean dust filter monthly; wipe exterior with damp cloth |
| Replacement Parts | Filter (model F-2420), Remote control (RC-2420) |
Frequently Asked Questions - WHF2420-W KING
How do I clean the filter on my KING WHF2420-W heater?
Turn off and unplug the heater. Locate the filter cover on the back, remove the filter, and rinse with warm water. Let it dry completely before reinserting. Clean every 2 weeks for optimal performance.
Why does my heater turn off unexpectedly?
The heater may have activated its overheat protection or tip-over switch. Ensure the heater is on a stable, flat surface and that air intakes are not blocked. Also check the thermostat setting.
Can I use the heater in a bathroom?
This heater is not rated for bathroom use unless it is IP24 rated. Check the manual for IP rating. Generally, avoid using in high humidity areas to prevent electrical hazards.
How do I set the timer?
Press the Timer button on the control panel or remote. Use the +/- buttons to set the desired hours (1-12). The light will blink to confirm. Once set, the heater will automatically turn off after the selected time.
What does the 'Fan Only' mode do?
In Fan Only mode, the heater circulates air without heating. This is useful for summer cooling or to circulate warm air from another source. It uses minimal power.
My remote control is not working. What should I do?
First, replace the batteries in the remote (CR2025). Check that there is no obstruction between the remote and the heater. If still not working, try resetting the heater by unplugging for 30 seconds. If problem persists, contact support for a replacement remote (model RC-2420).
How do I activate the oscillation?
Press the Oscillation button on the heater or remote. The heater will start oscillating left and right to distribute heat more evenly. Press again to stop at a desired position.
What is the recommended room size for this heater?
The WHF2420-W is suitable for small to medium rooms up to 20 square meters (215 sq ft) when used at high power. For larger rooms, it may serve as supplementary heating.
Is the heater safe to leave unattended?
While the heater has safety features like overheat protection and tip-over switch, it is not recommended to leave it unattended for long periods. Always ensure it is placed away from flammable materials.
How do I adjust the thermostat?
Turn the thermostat dial clockwise to increase the desired temperature. The heater will automatically cycle on and off to maintain the set temperature. Refer to the markings for approximate temperatures.
User questions about WHF2420-W KING
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Heating in PDF format for free! Find your manual WHF2420-W - KING and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WHF2420-W by KING.
USER MANUAL WHF2420-W KING
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : KING
Model : WHF2420-W
Category : Heating