42270 - Measurement Extech - Free user manual and instructions
Find the device manual for free 42270 Extech in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Digital Multimeter |
| Brand | Extech |
| Model | 42270 |
| DC Voltage Range | 200mV to 600V |
| AC Voltage Range | 200mV to 600V |
| DC Current Range | 200µA to 10A |
| Resistance Range | 200Ω to 20MΩ |
| Display | 3.5 digit LCD, 2000 counts |
| Power Supply | 9V battery (NEDA 1604, 6F22) |
| Dimensions | 119 x 76 x 32 mm |
| Weight | Approx. 200 g (including battery) |
| Safety Rating | CAT II 600V |
| Additional Functions | Diode test, continuity buzzer, transistor hFE test |
| Accessories Included | Test leads, 9V battery, user manual |
| Maintenance | Clean with a damp cloth; no solvents |
| Reparability | Replaceable battery and fuse; no user-serviceable parts inside |
Frequently Asked Questions - 42270 Extech
How do I measure DC voltage with the Extech 42270?
Set the rotary switch to the VDC range. Connect the test leads: black to COM, red to V. Touch the probes to the circuit and read the display.
What type of battery does the Extech 42270 use?
The device uses a standard 9V battery (NEDA 1604 or 6F22). Replace when the low battery indicator appears.
How do I test continuity with this multimeter?
Turn the dial to the continuity/beep symbol. Connect leads as for resistance. A beep indicates continuity (< 50Ω typically).
What is the maximum voltage I can measure safely?
The Extech 42270 is rated for CAT II 600V. Do not exceed 600V DC or AC rms between any terminal and earth ground.
How do I replace the fuse?
Disconnect leads and turn off. Open the battery compartment and replace the blown fuse with a 0.5A/250V fast-blow fuse. Do not use a different rating.
Why does the display show '1' or 'OL'?
'1' or 'OL' indicates overload, meaning the measurement exceeds the selected range. Switch to a higher range or check leads.
Can I measure AC current?
Yes, turn the dial to ACA range. Insert the red lead into the 10A jack for high current or the mA jack for lower currents. Always start at the highest range.
What does the diode test function do?
It applies a small voltage and displays the forward voltage drop of a diode. A good silicon diode reads ~0.6V. No reading or short indicates a bad diode.
How do I clean the multimeter?
Use a soft, damp cloth with mild soap. Do not use abrasive cleaners or solvents. Dry thoroughly before use.
Is the Extech 42270 auto-ranging?
No, it is a manual-ranging meter. You must select the appropriate range for accurate readings.
User questions about 42270 Extech
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Measurement in PDF format for free! Find your manual 42270 - Extech and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 42270 by Extech.
USER MANUAL 42270 Extech
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Extech
Model : 42270
Category : Measurement