2713APRDK-MF - Uncategorized Irritrol - Free user manual and instructions
Find the device manual for free 2713APRDK-MF Irritrol in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Irrigation Controller / Sprinkler Timer |
| Brand | Irritrol |
| Model | 2713APRDK-MF |
| Number of Zones | 13 |
| Power Source | 24 VAC (transformer included) |
| Battery Backup | 9V battery (not included) |
| Dimensions (H x W x D) | 8.5 x 5.5 x 2.5 inches |
| Weight | 1.2 lbs (0.54 kg) |
| Programming | 7-day calendar with multiple start times |
| Watering Duration | 1 minute to 99 minutes per zone |
| Rain Delay | Yes, adjustable up to 7 days |
| Manual Operation | Yes, per zone or all zones |
| Watering Frequency | Customizable per day or interval |
| Display Type | LCD with backlight |
| Indoor/Outdoor Use | Indoor mount only (weather-resistant cover optional) |
| Certifications | UL / CUL listed |
| Warranty | 2 years limited |
| Spare Parts Availability | Transformer, sensors, and zone modules |
| Maintenance | Clean faceplate with damp cloth; replace battery annually |
| Safety Features | Circuit breaker protection; rain sensor input |
Frequently Asked Questions - 2713APRDK-MF Irritrol
How do I set the current time and day?
Press the SET button until the time display flashes. Use the + and - buttons to adjust hour and minute, then press SET again for day. Repeat for day selection.
How many watering programs does the controller support?
It supports up to 4 independent programs (A, B, C, D), each with its own start times and watering days.
What type of valve does this controller work with?
It works with standard 24 VAC solenoid valves commonly used in residential sprinkler systems.
Can I connect a rain sensor?
Yes, the controller has a dedicated rain sensor input (two wires) that will automatically suspend watering when the sensor detects rain.
How do I manually run a single zone?
Rotate the dial to MANUAL and press + or - to select the zone. Then press START to run that zone for the programmed duration.
What should I do if the display shows 'ERR'?
An ERR message typically indicates a short circuit or high current draw. Check wiring to valves and ensure no bare wires are touching. Press RESET if necessary.
How do I reset the controller to factory defaults?
Press and hold the RESET button (located inside the battery compartment) for 3 seconds. All programs and settings will be erased.
What is the maximum number of start times per program?
Each program can have up to 4 start times per day, allowing multiple watering cycles.
Can I use this controller for drip irrigation?
Yes, but you may need a pressure regulator and filter. The controller can handle drip zones as long as the solenoid valve is compatible with 24 VAC.
How do I replace the backup battery?
Open the battery compartment (located at the bottom) and replace the 9V alkaline battery. Battery is not included. Replacement is recommended annually.
User questions about 2713APRDK-MF Irritrol
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual 2713APRDK-MF - Irritrol and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 2713APRDK-MF by Irritrol.
USER MANUAL 2713APRDK-MF Irritrol
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Irritrol
Model : 2713APRDK-MF
Category : Uncategorized