Irritrol

2711APRDK-MF - Kit de vanne de zone goutte à goutte Irritrol - Free user manual and instructions

Find the device manual for free 2711APRDK-MF Irritrol in PDF.

📄 7 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Irritrol 2711APRDK-MF - page 2
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Drip Zone Valve Kit
Brand Irritrol
Model 2711APRDK-MF
Application Drip irrigation systems for gardens, landscapes, and greenhouses
Connection Size 3/4 inch FNPT inlet and outlet
Operating Pressure 20-80 psi (1.4-5.5 bar)
Flow Rate Up to 15 GPM (57 L/min)
Valve Type Manual gate or ball valve with flow control
Material High-impact plastic (PVC or polypropylene)
Dimensions (H x W x D) 6.5 x 3.5 x 3.5 inches (16.5 x 8.9 x 8.9 cm)
Weight 0.6 lb (270 g)
Includes Valve body, flow control knob, anti-siphon device, and installation hardware
Flow Control Adjustable flow from off to full open
Anti-Siphon Integrated to prevent backflow contamination
Operating Temperature 32°F to 120°F (0°C to 49°C)
Compatibility Works with standard 3/4 inch drip irrigation fittings and tubing
Installation Above ground or buried in valve box; hand-tighten connections
Maintenance Clean filter screen periodically; lubricate O-rings with silicone grease
Safety Do not exceed maximum pressure; winterize by draining before freezing
Warranty Limited 1-year manufacturer warranty

Frequently Asked Questions - 2711APRDK-MF Irritrol

What is the recommended operating pressure range for the Irritrol 2711APRDK-MF drip zone valve kit?
The recommended operating pressure is between 20 and 80 psi (1.4-5.5 bar). Exceeding this range may damage the valve or cause leaks.
Can this valve be used with automatic controllers?
The 2711APRDK-MF is a manual valve with a flow control knob. It is not designed for automatic electric control. For automatic operation, consider Irritrol's electric valve models.
What type of connections does the valve have?
It has 3/4 inch female NPT threaded connections on both inlet and outlet, compatible with standard drip irrigation fittings.
How do I winterize the valve to prevent freezing damage?
Before freezing temperatures, shut off the water supply, open the valve fully to drain residual water, and blow out the line with compressed air if possible. Store the valve in a frost-free location.
What should I do if the valve does not shut off completely?
Check for debris or mineral buildup inside the valve. Disassemble and clean the internal components. If the O-rings are worn, replace them with silicone grease for a proper seal.
Is this valve suitable for use with fertilizers or chemicals?
Yes, the plastic construction is resistant to most fertilizers and chemicals used in drip irrigation. However, avoid concentrated chemicals that may degrade the plastic. Flush the system after chemigation.
Can I install the valve underground?
It is recommended to install the valve above ground in a valve box for easy access. Direct burial is not advised as debris can clog the mechanism. If buried, use a protective box.
How do I adjust the flow rate?
Turn the flow control knob clockwise to reduce flow or counterclockwise to increase. The knob allows fine adjustment from fully closed to fully open.
What maintenance is required?
Periodically clean the inlet filter screen (if included) and inspect O-rings for wear. Lubricate O-rings with silicone grease annually. Check for leaks at connections.
Does the kit include an anti-siphon device?
Yes, the Irritrol 2711APRDK-MF features an integrated anti-siphon to prevent backflow of water into the main supply, meeting code requirements for irrigation systems.

User questions about 2711APRDK-MF Irritrol

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Kit de vanne de zone goutte à goutte in PDF format for free! Find your manual 2711APRDK-MF - Irritrol and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 2711APRDK-MF by Irritrol.

USER MANUAL 2711APRDK-MF Irritrol

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Irritrol

Model : 2711APRDK-MF

Category : Kit de vanne de zone goutte à goutte