VS-8248 Pro+ - Video recorder QNAP - Free user manual and instructions
Find the device manual for free VS-8248 Pro+ QNAP in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Network Video Recorder (NVR) |
| Model | VS-8248 Pro+ |
| Brand | QNAP |
| Channels | 48 channels |
| Drive Bays | 8 x 3.5-inch SATA (up to 16TB each) |
| Processor | Intel Core i7 or Xeon (varies by configuration) |
| Memory | 16 GB DDR4 (expandable up to 64 GB) |
| Dimensions (H x W x D) | 88 x 482 x 560 mm (3.5 x 19 x 22.0 inches) |
| Weight | Approximately 13.5 kg (29.8 lbs) without drives |
| Power Supply | 550W redundant power supply |
| Input Voltage | 100-240 V AC, 50/60 Hz |
| Power Consumption | 110 W (typical, without drives) |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Humidity | 5% to 95% non-condensing |
| Main Functions | Real-time recording, playback, motion detection, remote access, smart search, failover |
| Maintenance | Regularly clean dust filters, check HDD health, update firmware |
| Safety | UL, CE, FCC certified; built-in surge protection |
| Spare Parts & Repairability | Replaceable HDDs, fan modules, power supply; user-replaceable with hot-swap support |
| General Information | Supports up to 48 IP cameras, 8 PoE+ ports, dual gigabit LAN, HDMI output |
Frequently Asked Questions - VS-8248 Pro+ QNAP
How do I access the VS-8248 Pro+ remotely?
Use the QNAP QVR Pro client or the QVR Pro mobile app after configuring port forwarding on your router. Ensure the NVR is connected to the network and assigned a static IP.
What types of hard drives are compatible?
Compatible with 3.5-inch SATA hard drives up to 16TB, preferably surveillance-grade drives like Seagate SkyHawk or WD Purple.
How to reset the admin password?
Press the reset button on the rear panel for 10 seconds while the device is powered on. This will reset the password to default and clear network settings.
Can I use it with non-QNAP cameras?
Yes, the VS-8248 Pro+ supports ONVIF Profile S, G, and T cameras from various brands. Add cameras manually via the QVR Pro interface.
How to configure motion detection?
In QVR Pro, go to Camera Settings, select your camera, enable Motion Detection, and adjust sensitivity and detection areas as needed.
What is the maximum recording resolution?
Supports up to 12 MP per channel at 30 fps, depending on camera capabilities and bandwidth.
How to perform a factory reset?
Use the reset button on the rear panel (hold for 10 seconds) or access the admin interface: Settings > System > Reset to Default.
How to update firmware?
Download the latest firmware from QNAP's website. In QVR Pro, go to Settings > Firmware Update, upload the file, and follow prompts. The NVR will reboot.
What is the warranty period?
QNAP offers a standard 2-year warranty; extended warranties are available for purchase. Check your region for specifics.
How to replace a faulty hard drive?
The VS-8248 Pro+ supports hot-swapping. Remove the faulty drive from its bay, insert a new one, and it will be detected automatically. Use QVR Pro to rebuild the RAID if configured.
User questions about VS-8248 Pro+ QNAP
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Video recorder in PDF format for free! Find your manual VS-8248 Pro+ - QNAP and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VS-8248 Pro+ by QNAP.
USER MANUAL VS-8248 Pro+ QNAP
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : QNAP
Model : VS-8248 Pro+
Category : Video recorder