EEZ90001 - Dishwasher ELECTROLUX - Free user manual and instructions

Product Type	Dishwasher
Brand	Electrolux
Model	EEZ90001
Dimensions (HxWxD)	85 cm x 60 cm x 62 cm
Net Weight	45 kg
Energy Efficiency Class	D
Energy Consumption per 100 Cycles	95 kWh
Water Consumption per Cycle	10 L
Capacity (Place Settings)	14
Noise Level	44 dB(A) re 1 pW
Number of Programs	6
Programs	Eco, Auto, Intensive, Quick, Glass, Rinse
Drying System	Condensation drying
Water Supply	Cold water only
Power Supply	220-240 V, 50 Hz, 10 A
Adjustable Racks	Upper rack height adjustable
Self-Cleaning Filter	Automatic self-cleaning system
Safety Features	Child lock, leak protection, overflow protection
Maintenance	Clean filter monthly, run maintenance cycle
Spare Parts Availability	Spare parts available for 10 years after purchase
Repairability Index	8.5/10

Frequently Asked Questions - EEZ90001 ELECTROLUX

How do I install the dishwasher?

Ensure the installation site has a water inlet, drain, and power outlet. Level the appliance using the adjustable feet. Connect the inlet hose to a cold water supply (max 60°C) with a 3/4 inch thread. Attach the drain hose to a siphon or sink drain. Finally, plug in the power cord.

How to load the dishwasher correctly?

Place plates and bowls in the lower rack facing downwards, cups and glasses in the upper rack. Ensure items are not blocking the spray arms. Place cutlery in the cutlery basket with handles down. Avoid overloading to allow water circulation.

How to clean the filter?

Turn off the dishwasher and remove the lower spray arm. Twist the coarse filter counterclockwise and remove it. Clean all filter components under running water with a soft brush. Reassemble and ensure they are firmly locked.

When do I need to add salt?

Salt is required for water softening. The salt indicator on the control panel will light up when salt needs to be added. Open the salt dispenser cap, fill with dishwasher salt (not table salt), and clean any excess. Then tighten the cap.

How to use rinse aid?

Rinse aid improves drying and prevents water spots. Open the rinse aid dispenser, fill until the indicator turns dark, and adjust the dosage (usually between 1 and 6). Close the cap. Refill when the indicator shows low.

What do error codes mean?

Common errors: i10 = water inlet problem (check tap and hose); i20 = drain issue (check filter and hose); i30 = leak detected (call service). Refer to the manual for full list. Many errors can be reset by pressing Start for 5 seconds.

Why is the dishwasher noisy?

Noise can be caused by items rattling against each other, loose spray arms, or grinding sounds from debris in the pump. Ensure proper loading, check for foreign objects in the filter, and make sure the appliance is leveled.

How to save energy and water?

Use the Eco program for normally soiled dishes. Run full loads, scrape off food, but do not pre-rinse. Select the half-load option when needed. Use air-dry instead of heated dry. Clean filters regularly for efficiency.

How to descale the dishwasher?

Run a descaling program with a commercial descaler or use citric acid. Remove any dishes and run an empty cycle at high temperature. Alternatively, use a dishwasher cleaner tablet monthly.

What detergent should I use?

Use a high-quality dishwasher detergent in tablet, powder, or gel form. All-in-one tablets (e.g., with salt and rinse aid) are convenient but may need additional salt in hard water areas. Avoid hand dish soap as it causes foam.

USER MANUAL EEZ90001 ELECTROLUX

(a) this item shall not be considered relevant for the purposes of Article 2(6) of Regulation (EU) 2017/1369.
(b) För eco-programmet.
(c) changes to these items shall not be considered relevant for the purposes of paragraph 4 of Article 4 of Regulation (EU) 2017/1369.
^(d) if the product database automatically generates the definitive content of this cell the supplier shall not enter these data.