Lift 19 78089WHT - Projection screen DA-LITE - Free user manual and instructions
Find the device manual for free Lift 19 78089WHT DA-LITE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Motorized Projection Screen |
| Brand | Da-Lite |
| Model | Lift 19 78089WHT |
| Screen Diagonal (inches) | 19 |
| Aspect Ratio | 16:9 |
| Screen Material | Matte White Vinyl |
| Gain | 1.0 |
| Viewing Angle | 180 degrees |
| Motor Type | Quiet AC Motor |
| Power Supply | 120V AC, 60Hz |
| Power Consumption | 50W (operating), 1W (standby) |
| Control Options | IR Remote, Wall Switch (optional) |
| Mounting | Ceiling or Wall Mount |
| Dimensions (W x H x D) | 18.5 x 11.7 x 4.5 inches |
| Weight | 15 lbs |
| Color | White (WHT) |
| Warranty | 2 years limited |
| Cleaning Instructions | Wipe gently with a soft, dry cloth. Avoid liquid cleaners. |
| Safety Precautions | Keep away from children. Do not block ventilation slots. |
| Spare Parts Availability | Contact Da-Lite customer service for replacement parts. |
| Country of Origin | USA |
Frequently Asked Questions - Lift 19 78089WHT DA-LITE
How do I install the Da-Lite Lift 19 projection screen?
The screen can be mounted on a ceiling or wall using the provided brackets. Ensure the surface is sturdy and follow the installation guide for proper alignment and secure anchoring.
What is the screen material and how do I clean it?
The screen uses a matte white vinyl surface. Clean it with a soft, dry cloth. Do not use any chemical cleaners or abrasive materials.
How do I operate the screen remotely?
Use the included IR remote control to raise or lower the screen. Point the remote at the sensor on the screen housing. Ensure there are no obstructions between remote and sensor.
What should I do if the screen does not move?
Check the power connection and ensure the screen is plugged into a working outlet. Verify the remote has batteries installed. If the motor still does not respond, consult the troubleshooting section of the manual.
Can I connect the screen to a home automation system?
Yes, the screen can be integrated with home automation systems using optional low-voltage control wires. Contact Da-Lite for compatible interfaces.
What are the power requirements?
The screen operates on 120V AC, 60Hz power. It consumes about 50W when running and less than 1W in standby mode.
How do I replace the remote control batteries?
Slide open the battery compartment on the back of the remote. Replace with two AAA batteries (not included), observing proper polarity.
What is the warranty coverage?
The screen comes with a 2-year limited warranty covering defects in materials and workmanship. Register your product on the Da-Lite website to activate warranty.
Is the screen suitable for outdoors?
No, the Lift 19 is designed for indoor use only. Exposure to moisture or extreme temperatures can damage the screen and motor.
Where can I find the user manual?
The user manual is available for free download in PDF format from the product page on notice-facile.com or the Da-Lite official website.
User questions about Lift 19 78089WHT DA-LITE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Projection screen in PDF format for free! Find your manual Lift 19 78089WHT - DA-LITE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Lift 19 78089WHT by DA-LITE.
USER MANUAL Lift 19 78089WHT DA-LITE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : DA-LITE
Model : Lift 19 78089WHT
Category : Projection screen